1. deathadder666

    Log 2-pin Molex to 6 pin AUX on Corsair PSU

    I've done this before with a D5 pump, where I took the two pin Molex and sleeved into a 6-pin AUX connector for a Corsair SF450. That system is long gone and I cannot remember which (or where I learned it) connections on the 6-pin go. Based on the various diagrams (none of which are super exact)...
  2. owliwar

    Cooling 80mm / 160mm Radiator performance?

    HI I'm recently loosing sleep because this idea is lingering and I'm not sure if this is something thats worth it but I kinda want to do it anyway and need help finding data my ideia is to watercool an 65w cpu and an rx480 with a dual 80mm rad (160mm). Even if temps are kinda high it should be...
  3. Obelisk

    HDPLEX Compatibility

    Hello all, I was wondering if the HDPLEX 160W AC-DC could work with KMPKT’s own 160W DC-ATX? They look similar, but didn’t know if there were any cross-unit voltage differences, and if they can function together.
  4. snyed

    Magnetic Dust Filters

    I'm looking into buying 2 long magnetic dust filters for my pc, but I don't want to spend too much on them and ideally I want them to work well. If you have any suggestions, please let me know. Thanks!
  5. snyed

    PC Chassis Holes

    I'm currently working on a custom pc, and in many of the designs I see there is U shaped holes along the side of the chassis. Do you know what these are? Are they important? Link to the image
  6. O

    What is currently the most powerful GPU for the S4 Mini?

    I want to put the best current gpu that will fit in the s4 mini. I'd prefer ones that would fit with little to no mods but I'm interested in all options. As far as I know, right now there are certain gtx 1070 minis that will fit without mods and the gtx 1080 mini from zotac with mods. I
  7. F

    NCASE M1, optimal fan setup?

    So as the title implies, I'm one of the million people planning a build inside the NCASE M1. I'm trying to shave a little off the price of the system (needed another $30 to upgrade from the SSF450 to SF600) and I'm wondering if I could forgo some fans. My original idea was to have two ML120s at...
  8. C

    AM4 ITX Cooler Compatibility

    I was wondering if anyone would be able to answer my question of whether or not the Dark Rock TF would have any compatibility issues on both the AsRock AM4 ITX or the Biostar X370GTN which I am about to be using until the AsRock board becomes available. Also probably worth noting that I am using...
  9. K

    Which case should I get?

    I am planning to build a portable machine that I can take with me for LANs and trips overseas. The case needs to fit a SFX-L PSU, 122mm Graphics Card, A full size HDD and SSD, and a mini ITX board with at least 60mm clearance, What would reccomendation be baased on these specs?
  10. L

    Q: Motherboard Standoffs

    I know that the 2.1 ATX spec requires standoffs be at least 6.4mm and fit in a 10mm x 10mm area, however I'm curious as to the standard length(s) which standoff manufacturers tend to follow, and what the length measurement measures from (is it from inside surface of case/frame to back of...
  11. K

    Will my system have enough power?

    Will a HD-Plex 300w run these components? CPU: Intel i5-7600k CPU Cooler: Zalman CNPS2X Motherboard: MSI B250I GAMING PRO RAM: Kingston HyperX Fury Black 8GB (2x4GB) DDR4 Storage: Samsung 850 EVO 250GB M.2-2280 Hitachi Travelstar 1TB 2.5" 7200RPM GPU: Geforce GTX 1070 8GB Mini...
  12. K

    What Power Brick to use for PICOBOX 500w

    Title says it all.
  13. L

    Trying to work out a case layout...

    I'm trying to work out the best layout I can come up with for a microATX, which will have at least 2x 2.5" bays for SSD's, at least 1x 3.5" bay for a HDD, and preferably if possible a 5.25" bay for optical drive for installing things (or for a fan controller if I so choose). The last in the list...