itx gpu

My Work in Progress 55mm H* PIO/ITX STL (* plus top and bottom sheet metal of 1.5mm-2.0mm). It is designed to be used with M3 round standoffs with 5mm OD; brass heat inserts may possibly work. The depth of my board is 190mm, so the sides are 195mm. The front is not final, I will need to...

REVOCCASES RCC-SMALL2 Specs: Size: 363H x 183D x 89W (ca. 6L) GPU Clearance: 180L x 135H x 68W CPU Cooler Clearance: max. 71mm high HDD/SSD Support: 2x 2.5" Drives, up to 9mm high Case fan: 1x up to 120 x 25mm with two slot (40mm) GPU Power Supply: FLEX ATX Sample Build: 1) insert the screws...

Hey everybody, long time no see :) My PC is due for a GPU upgrade, and as one of my usecases is Realtime-Kernel development and audio production on Linux, nVidia is not an option. I have a Lazer3D LZ7, so the GPU can't be longer than 181mm. Well, as luck has it, ASRock released the RX 5500 XT...

RCC-NUC1 is a Custom Designed Graphics Card Add-On for 8th Gen and 10th Gen NUCs Why not give your NUC a decent GPU Boost while maintaining the small footprint on your desk? Sure, you can connect a graphics dock via Thunderbolt, but then you`ll loose that port for other accessories and you`ll...