Recent content by Raxe

I was able to do the mod to my Zotac RTX 3060 Ti Twin Edge OC, but it was a long journey. Doing the heatsink swap was super easy, but straight out of the box, the temperatures skyrocketed to 90C in a few seconds with the stock +200W power consumption. Doing a heavy undervolt of 0,681mV and 1.480...

What are the downsides of using an SFX-L in the A4-H2O? As it seems that the new generation of RTX 40XX will have a very high power consumption, I'm thinking about the possibility of buying that form factor psu in a future.

Why the AXP-90 Cooper performs only 1 degree better than the aluminium one? In Reddit there are people saying about 4-7 degrees better the cooper against the aluminium.

Now say FformD like Terry Crews Old Spice Commercial XD

And the Galax rtx 2070 mini? It says 190mm with pci bracket, 175mm without bracket http://www.galax.com/en/graphics-card/20-series/2070-series/galax-geforce-rtx-2070-white-mini-1click.html

The dimensions of the G-Stick Slim are: 22.5cm 5cm 3.6cm. This was tested on the Nfc S4M, console layout, compatible with a rtx 2070 gigabyte itx. The dimensions of the G-Brick Slim( the latest square one) are: 14cmx15cmx2.2cm . The dimensions of a standard Flex psu compatible with Velka 3...

If you want the NH-L12 to fit in a Velka case, you need to wait until september with the wider Velka 7 with cooler up to 70mm (NH-L12S). Velka 5 has more or less the same cooler height as the Dan A4, so you can see the benchmarks in the subforum of Dan cases. In the past the best cooler in...

Awesome! Thanks for the mod! So... standard m3 screws are enough to use the noctua fan without any hassle?

It uses a 12mm slim fan, so swapping with a 14mm noctua only increases the total height to 32mm. It seems that is one of the slimmest 4 heatpipe heatsinks. It will be awesome if anyone finds some review to see how it performs and if its better than the Nh-l9i/a

Anyone knows or has tested this cooler? I´ve never seen it before. 4 heatpipes, direct contact with base, 30mm height... Same weight as the Id cooling Is-30...It´s the same cooler but with different branding? https://www.dynatron.co/product-page/t497

@guryhwa How is the performance of the little Id Is-30 cooler? Better or worse than a Noctua L9i? Max cooler height is around 30mm, right?

@Wahaha360 Have you had the opportunity to weigh the SidearmD without components? Being a thick aluminum cnc i don't know if it's portable weight wise as i only have the typical 1.5mm thick aluminum case to compare. Looks so good so far btw!

Has Velka 5 support for 120mm AIO or 92mm AIO (Asetek 645lt) using an Sfx Psu and mini itx gpu? Or it's possible to use a flex atx(150mm) like Velka 3, a mini itx gpu and a 92/120mm radiator? Basically reducing height from Sfx to Flex for the 92mm radiator If not is going to be difficult to...

Such an extensive review! I didn´t read it before! So far so good it seems, maybe i can order this noctua from a friend who does hardware reviews tomorrow. i´ll wait for the full review in sff though.

Anyone know about the results/performance that this cooler provides? I was planning to do a mAtx backpack computer and this was the chosen one for my weird setup as the case have a width of 100mm. One of the things that most impressed me it´s the 140W Tdp rated for 2066 socket and the current...