Recent content by payo36

I designed this case specially for Ryzen APU, 4650G and 4750G. They both come with 54mm Wraith Stealth Cooler. On the back of motherboard. I fitted it with Mean Well PSU 200W and use DC/DC converter to connect to mother board. I have finished the prototype and tested with 4650G, the...

Gecko M - Installation video

No, rad can't be flip to the top. I have done many thermal test and this is best rad config for sandwich style case. If rad is place at the top, hot air from GPU will be sucked into the rad and it will effect CPU cooling performance while gaming. You probably won't see much effect with lower...

Gecko ITX all sizes are ready for shipping now. You can make purchase at www.minicomputers.net

You can try this photoes. Imgur works when I tried.

I've made this PC case for larger and hotter GPU. Fits GPU up to 70mm thick, 346mm long and 140mm tall. (Aorus RTX 3090 Extreme, MSI Supreme X) Fits 280 and 120mm AIO with full size fans. Fits 2 of 120x15mm fans at the top for exhaust. Size is 163x352x264mm 15.15 L I also make another 2...

20 mm for DDC and 25 mm for magic cube

I've tried 900mV, it's stable but not much reduction in temperature.

My current set up is i9 10900K + 2080Ti CPU is cooled with H100i, I under volt the CPU and max. temp in Blender is 83C (4.9GHz all core, no power limitation, Radiator is at the top) If I run CPU at stock the temp, it will reach 91C in no time and throttle eventually. The GPU (Zotac 2080ti...

I had to grind 1mm off the back of NF A12x15. If I force close the top panel, the fan blade will slightly scrape bottom of my M/B. The M/B is Aorus z490i Ultra, it has back cover and it extends a bit down. If I just add 0.5mm washer that comes with H100i Pro XT to space the fan further from the...

On the early page, someone tested two 120x15 against one 120x15 + one 120x25, the temp is about 1 C different. SM560 has taller feet, 15mm tall. Maybe I can mod the feet on T1.

I have this setup 2080Ti and 10900k in SM560 and I'm planning to move to T1 soon for bigger 240 AIO. I know Optimum Tech recommends putting radiator on top and exhaust the air outside of the case will give better CPU and GPU result. But he tested CPU and GPU separately, while in game there will...

I've tried with 10700k + Aorus 490i Ultra board. At stock 4.7 GHz all cores, it will max out at 77C in CB 20, Long blender load, temp will reach 83-85 C depends on ambient temp. In games it will be 55-75C The CPU Power during CB20 is 154 W. Now I'm running at 5.0 GHz all core, 1.325V The...

I've tried several 2080Ti on M1 V6. I get the best temp with 2 slots card + 2 of 120mm fans in the bottom. The thicker 3 slots card will run hotter without the bottom fans.

Usually it'll max out at 900mA for USB A, somewhere around 5W. For USB C, it's 15W (on my ASUS board) If you over load it, there'll be a message pop up in Windows notification area.