Recent content by JustinDulay

Went with the Phanteks 240MP as I wanted to route the hoses through the bottom. However, the Trident Z heatsinks are quite tall and sharp and actually damaged the braid on the tubes, so back to the top it is until I change my system.

I'd like to a shot at the Philippines slot. However, I only meet 1 criteria having owned sandwich style cases, mostly a lurker in this forum, and only dealt with AIOs. At the moment, my GPU is out of spec inside the Ghost S1 and it really wants to have a side panel in the form of the T1. ?

Optimum Tech’s new upload on the GTX 580 nostalgia shows a very sleek looking Sidearmd T1 in plain sight. ?

@KSliger For the SV590, is it possible to mount the PSU in the exact same way as the SM cases, orientation and distance from the motherboard? I have custom cables that are designed for those cases and would like to reuse them for the SV590. Should also open up space at the bottom.

I think it applies to everyone. I've tried different fans under the motherboard as exhaust; stock Black Ridge fan (15mm, absolute maximum it can fit), Noctua A9x14 (Retail 2200RPM), and Noctua A9x14 (L9 Box Cooler, 2500 RPM). All of them have this strong motor sound, probably from turbulence...

Here's another Black Ridge V2 on the Dan A4-SFX. CPU Fan: Noctua A9x14 2500 RPM Version Case Fan: Stock Black Ridge Fan under the motherboard, set as exhaust Ambient: 27C Gaming Load Temps: 55-65C Synthetic Load Temps: 80C BIOS/UEFI Settings: All stock for the CPU, with Manual RAM timings at...

@Hellow I have a 3700X on an Asus B450i with a Black Ridge using just the 92mm fan. What dondan said is correct - when I boot up my PC and fire up Ryzen Master, I’m going to see the VCore sitting at 1.4 or higher. The temps are sitting at 55 to 60C with just the usual startup programs. Once...

Thank you for testing this! Is this with fan duct or without it? 80-85 in Prime is actually good for the L9a, given that the system won't be stressed that much in normal use cases.

Good or bad surprise? :D How do temps compare with the Black Ridge using the same Noctua fan? Looking good! Which is it, though? 3600 or 3900X? I'm soon gonna build in the V4 with a Black Ridge, so that leaves me with space for a 92mm fan that's 25mm thick under the PSU. Is it better as...

Any word on stocks for SFFLab? Was hoping to get it from there as opposed to OcUK for worldwide shipping.

It's this post that had a partial shot of the revised bottom ventilation and 140mm fan mounts.

I think this is a good idea for the next revision of the case - but it best be an adjustable mount to raise the PSU bracket (probably additional mounting holes for height adjustment) because I believe it was originally placed with enough clearance on top for a 240mm AIO tube to drop/hang...

Just did another check on SFFLab, previously it stated preorders to start by mid/end June, now the it just says mid June. Minor change, but I’m hoping it’s indicative that we can preorder in the next couple of days. ?

Anyone tried 2x 92x14mm in the bottom as exhaust? Should help exhausting the hot air out of the GPUs, as well as CPU coolers that intake from the sides.

Kinda not the topic at hand but those renders - they show the new bottom vent, don't they? It looks like dedicated 140mm fan holes if one removes the clips in the middle, and 120mm fans are now on a much longer rail mounting system than before?