Normal
You should route your excess 24pin cable under the gpu side and secure it to the bottom part of the case with a zip tie and squish the cables flat that are on the fan so it doesnt hit the gpu. Gpu 6+2 pin cables can be routed between the tubes to the front (ssd will still fit if you have 1 there). 4+4 pin can be routed behind the mobo aswell as the 4 pin of the fan on the rad and the power switch.A bit like this [MEDIA=imgur]m6BQqOU[/MEDIA]Make sure the 24pin doesnt stick out alot on the mobo or your side panel wil not close because of the tubes and also zip tie the tubes to your 24pin cable so it wont stick out.
You should route your excess 24pin cable under the gpu side and secure it to the bottom part of the case with a zip tie and squish the cables flat that are on the fan so it doesnt hit the gpu. Gpu 6+2 pin cables can be routed between the tubes to the front (ssd will still fit if you have 1 there). 4+4 pin can be routed behind the mobo aswell as the 4 pin of the fan on the rad and the power switch.
A bit like this [MEDIA=imgur]m6BQqOU[/MEDIA]
Make sure the 24pin doesnt stick out alot on the mobo or your side panel wil not close because of the tubes and also zip tie the tubes to your 24pin cable so it wont stick out.
