SFF.Network Thor Zone Shows NANOQ SFF Case (Updated)

Image Credit – Thor Zone
 
Thor Zone has announced the NANOQ SFF cases, which launches in Q3 -2023. Coming in with two sizes of 11L for the NANOQ S and 16L for the NANOQ R,  the case features a stainless steel tube frame interior with an aluminum shell. It can be position vertically or horizontally. The R case supports up to 378mm long GPUs, and the S Case supports GPUs up to 327mm in length. Both models have confirmed support for RTX 4090 Founders Edition, and the AMD RX 7900XTX Reference model GPUs.
The design appears to aim for flexibility allowing users to run configurations as open frame, horizontal, or vertical out of the box. The GPU has an adjustable spine for 3 or 4 slot GPUs. CPU...

Continue reading...

 

[PoneG]

If the feet for the housing are as wobbly as the inner frame of the mjolnir (at least that's what it looks like in the pictures) it will surely break. for 400 to 500€ vat included...still waay to expensive. not to think about the customer care etc.
what i like are the larger vents, because with the mjolnir the air was always just pressed against the thick edges and circulated further inside.
the airflow for the (standing on feet) upper fan is restricted somehow. i hope the opening is bigger than for the mjolnir as the 120mm fan couldnt blow much air out.

 

[AlexTzone]

If the feet for the housing are as wobbly as the inner frame of the mjolnir (at least that's what it looks like in the pictures) it will surely break. for 400 to 500€ vat included...still waay to expensive. not to think about the customer care etc.
what i like are the larger vents, because with the mjolnir the air was always just pressed against the thick edges and circulated further inside.
the airflow for the (standing on feet) upper fan is restricted somehow. i hope the opening is bigger than for the mjolnir as the 120mm fan couldnt blow much air out.

No sheet metal on this case-series, we want to avoid any wobble. So only CNCd parts. The core is mostly stainless steel which is much harder than aluminium (even more so when compared to the flimsy sheet metal parts on the MJOLNIR core). It will be priced around the same as the MJOLNIR (price will include shipping). Replacement parts will be made from the beginning, so we can send them out straight away instead of waiting for another launch. Also, no gluing, way to messy as we've learned with the MJOLNIR. In short, the goal was to make a case like the MJOLNIR but delete the weak aspects.