Log NFC S4 mini brickless build Maxsun RX550 4 Gb + i9-9900KF delid die + Alpenform Black Ridge

[edgefull]

Hello everyone. I used to have two cases: ncase m1 and Lazer 3d LZ7. Finally, I decided to build a computer in an nfc s4 mini case!

At the heart of my build:

• ASRock B365M-ITX
• Intel I5-9400F i9-9900KF delid + polish copper IHS (Collaboratory liquid pro + Noctua HT-2)
• Noctua L9i
• Gigabyte GTX1060 6 Gb mini DELL AMD WX3200 (Noctua HT-2)
• 2 x HDD 2,5 mm 1 + 1 Tb
• m2 nvme by Kllisre 128 Gb
• 2 x 8 Gb, 2666 mhz by Gloway
• HDPLEX 400 W DC-ATX
• AC-DC 400 W
• Sleeving cables 18 AWG black
• Button DIY 16 mm blue led
• DIY GX16 cable (maybe?)
• ...

 

[edgefull]

 

[edgefull]

I have several problems. The hard disk rests against the radiator DC-ATX 400 W ... Upward shift is impossible due to the fact that the power button is at the top.

I had to fix the hard drive with tape. Hopefully Josh sees this and moves the disc mounting holes inward.

The second problem is that it is necessary to move the video card upwards by 10 mm.

I did not find any drawings of the cover plate for connecting monitors. I will have to make a drawing myself, where the holes for the monitor connectors are offset by 10 mm up.
Perhaps I was looking badly and the drawing is freely available.

 

[eggDK]

Gigabyte GTX1066 mini

Hi, is this a typo? Or did I miss the arrival of a new GPU?

Good luck with the build (I don't own this case, so unfortunately can't give any advice.. Though I would love to own it some day!)

 

[edgefull]

Hi, is this a typo? Or did I miss the arrival of a new GPU?

Hi, I mean the 6 gigabyte version! Therefore, the number 6 in the title.
Thank you for your reply in my post!
I assembled the power cable yesterday! Purchase links:
PET sleeve 8 mm $0.69

0.63US $ 9% OFF|8mm Braided Expandable Sleeve PET Tight Wire Wrap High Density Insulated Cable Harness Line Protector Cover Sheath Single|Cable Sleeves| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

GX16 3 pin connector $0.47

0.47US $ 1% OFF|1set Gx16 2/3/4/5/6/7/8/9 Pin Male & Female 16mm Wire Panel Circular Connector Lid Cap L70-78 Aviation Connector Socket Plug - Connectors - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

HI-End Schuko male plug EU version 24K Gold Plated $7.00

5.95US $ 15% OFF|Hi-end Schuko Plug Eu Version Power Plugs For Audio Power Cable 24k Gold Plated Male Plug Female Iec Connector - Plug & Connectors - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

Super soft silicone sheath wire 0.5 mm 3 core $1.06

1.24US $ 10% OFF|Sq 0.3 0.5 0.75 1 1.5 2 2.5 4 6mm Ultra Soft Silicone Rubber Cable 2 3 4 6 Cores Insulated Flexible Copper High Temperature Wire - Electrical Wires - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

Heat Shrink Tube Kit $1.33

3.04US $ 30% OFF|164pcs 328pcs 2:1 Heat Shrink Tube Kit Shrinking Assorted Polyolefin Insulation Sleeving Wire Cable 8 Sizes - Cable Sleeves - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

Finally assembled a cable!


I also ordered a shorter button. I'm thinking of shifting up DC-ATX 400 W.

 

[edgefull]

I replaced the 92mm graphics card cooler with two 92mm coolers from Noctua.

I also removed the bracket to make the model in Auto CAD. A new bracket will be laser cut! This is required to create a brickless build with Gigabyte GTX1060.

 

[Robotanv]

Hi.
Good luck with the build. I recently finished my S4 Mini and the GPU part is a bit tricky. Did the same as you.. replaced the stock cooler with noctua fans but also had to cut down the heatsink to get it to fit! I don't know how to 3d print but I'm sure that would have made my life easier!

 

[Robotanv]

And that power cable looks really nice!

 

[edgefull]

So, update. My graphics card is dead. Currently I have purchased an intel core i9 9900kf processor and a graphics card from dell amd wx3200! I hope to start building soon!