And changes in my life happened, so its all up in the air again. Plans for the custom loop are on ice for now.
Guess I might just build the Mesh-mATX like I originally planned, but in the Meshroom S, and THEN start planning on rebuilding it into the A4-H2O as some sort of "AC4-H2O Vertical Tower", ie. GPU on top, 280 mm AIO on the GPU side, and then rotated by 90° so that the front is turned into the bottom...
... On the other hand, I'm kinda fixed on the Shiny Snake S400, which would be perfect in size if not for the fact, that its a bit too low in height (I could install BOTH GPU + Radiator on the GPU side, with my current RX 6800, which is only 100 mm wide, if the top was just about 20 mm taller). Of corpse, that one would ALSO be turned into a vertical tower 
I was quite happy with how the Vertical Tower mod of the SAMA IM01 mATX NAS turned out, and like to do it again, just on a smaller scale, with a CPU with a bit more "oomph", so my current main workstation with the 13700k is gonna moved. But might change the CPU to a 13900k and PL it to 150 or 180W, as its shown in several tests that its performing at the same level as the 13700k at no PL - when PL'd to 125W.
cu, w0lf.
