REVIEWED: GeForce RTX 5060 Ti with ZOTAC GAMING RTX 5060 TI Twin Edge OC

Reply to thread

Message

3.3v sense to ground sense on the 10-pin. Correct me if I am wrong, please. If it is not modular, you can use 24 24-pin harness and std location for 3.3 and grd.
3. Identify the Green and Black Wires:
Locate the green wire (power-on signal) and a black wire (ground) on the 24-pin connector.
If all wires are black, place the connector with the lock clip facing up and then short 4th and 5th pins (counting from left to right) in the upper row. at the end of the 20+4 pin cable for this power supply.
Do not short the wrong pins: Jumping the wrong pins can damage the PSU or other components.

<blockquote data-quote="DASBOOT" data-source="post: 292936" data-attributes="member: 5448">3.3v sense to ground sense on the 10-pin. Correct me if I am wrong, please.&nbsp; If it is not modular, you can use 24 24-pin harness and std location for 3.3 and grd.<img src="https://hosting.photobucket.com/6606e8cb-e818-422f-a559-2b2154feb81d/08a8c533-51c0-42f1-9708-b9c20168d8b2.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="width: 662px" />3. Identify the Green and Black Wires: <ul>
<li data-xf-list-type="ul">Locate the green wire (power-on signal) and a black wire (ground) on the 24-pin connector. </li>
<li data-xf-list-type="ul">If all wires are black, place the connector with the lock clip facing up and then short 4th and 5th pins (counting from left to right) in the upper row. at the end of the 20+4 pin cable for this power supply.</li>
<li data-xf-list-type="ul">Do not short the wrong pins: Jumping the wrong pins can damage the PSU or other components. 
</li>
</ul></blockquote>

[QUOTE="DASBOOT, post: 292936, member: 5448"] 3.3v sense to ground sense on the 10-pin. Correct me if I am wrong, please. If it is not modular, you can use 24 24-pin harness and std location for 3.3 and grd. [IMG width="662px"]https://hosting.photobucket.com/6606e8cb-e818-422f-a559-2b2154feb81d/08a8c533-51c0-42f1-9708-b9c20168d8b2.jpg[/IMG] 3. Identify the Green and Black Wires: [LIST] [*]Locate the green wire (power-on signal) and a black wire (ground) on the 24-pin connector. [*]If all wires are black, place the connector with the lock clip facing up and [B]then short 4th and 5th pins[/B] (counting from left to right) in the upper row. at the end of the 20+4 pin cable for this power supply. [*][B]Do not short the wrong pins:[/B] Jumping the wrong pins can damage the PSU or other components. [/LIST] [/QUOTE]

Verification