CPU Avoid the performance loss of DeskMini X600 BIOS 4.08/ 4.10 or newer

[sandyware]

In the new BIOS of the DeskMini X600, the "Performance Mode" option has been removed, resulting in extremely low power limits. This issue can be resolved by disabling Prochot VRM Throttling and Peak Current Control under Advanced \ AMD Overclocking \ Manual CPU Overclocking. However, please note that VRM cooling is critical, as the system will no longer throttle to protect against high temperatures. You can monitor VRM temperature in HWINFO64/sensor/CPU VDDCR_VDD VRM (SVI3 TFN), make sure it lower than 100℃.

Then my 9800X3D benchmarks great.(Unlocked power limit to 120W)

 

[HydrAxx747]

Thank you very much for the information, maybe I will finally be able to upgrade my BIOS (current on my X600: 4.03.MEM01) to the latest "4.12" while being able to fully exploit my Delta Inc. ADP-330ABD power supply (330 Watts max), finally I can no longer be arbitrarily limited to 150 Watts maximum by the motherboard (whereas with the BIOS "4.03.MEM01" Performance mode on and unlimited PBO, I went up to total consumptions of 220 and 230 Watts without any problem). Thanks again