Reply to thread

Hey! I know it's been a year, but I'd like to ask if you were able to figure this one out. I got an A320TM-ITX and this LVDS to HDMI converter board. Unfortunately, I'm not getting any video output through that. I had a thorough look at the docs to make sure I got the wiring right, tried different jumper configurations and UEFI settings, and in a last ditch effort even soldered the resistor that's suggested by the makers of the converter to switch over to JEIDA from VESA; no luck. Starting to wonder if I perhaps got unlucky and either the Mainboard or, more likely, the converter, is defective - but then again, the latter gets warm to the touch, so it must be doing *something*, right? :D


Has anyone had troubles with this before and perhaps overcome them? Oh and, to be clear, the regular HDMI outs work just fine. Once I remove the PANEL_DISABLE jumper, I get no video from either the onboard HDMI nor the LVDS+Converter. Using a 3400G.


PS: Here's the (as far as I can tell) relevant portion from both manuals/datasheets:


[ISPOILER]

[/ISPOILER]


A320M-ITX Manual

LVDS Converter Datasheet