Recent content by srekal34

2x280mm radiator is more than enough for 500W at 1000rpm. I doubt you will get more than 500W with this config in any real workload. Of course there will be people running furmark+linpack at the same time and moaning about how much heat it is. But well, idiots gonna be idiots.

Easiest way to test for leakages is this: https://www.scan.co.uk/products/ek-gauged-pressurised-leak-tester-plus-pump-for-closed-loop-watercooling-g1-4-cnc-aluminium, basically what @Allhopeforhumanity suggested

Haha ok;-) wasnt aware of it. You basically have 40cm of lenght available for gpu and pump. If your pump is 10cm(d5 for example) you have 30cm left for gpu.

Well after such response I wouldnt bother measuring.

@Sligerjack Will PCI-E 4.0 Risers be available separately and distributed by Density?

EK SPC is the rebrand of the Syscooling pump available with various tops as P60 and P67. Its not a bad pump(I am using one in my current setup), but they are not very reliable(always have one spare, costs around 15USD) @up Alphacool DC-LT is far inferior to both DDC and SPC. No contest really.

@Nouvolo Would you have an estimated release timeframe?

Sure, 1 hour run of Realbech with [email protected] 1.35v , highest reported temperature was 79 degrees(room temp 22 degrees). Still pretty great for such a hot chip. VRMs are fine to touch, not sure of the temperature. No throttling, so I guess all good. This is CPU only loop for now so there is not...

Yeah absolutely. I would have preferred A12x25 too. We will have to wait for A14x25 then ;) Noctua is saying late 2021.

You wont fit A12 with adapter. It takes 5mm, there wont be enough space for fitting on cpu side. You would have to use Koolance ultra slim 90 degrees. Sell A12 on Ebay, you will be able to buy 3x A14 for this :)

Have a look, I've drilled 2 holes to screw rad to the case. They are invisible with cover. Loving the case so far. Far better than SM580 in terms of cooling capacity. Far better than anything in ITX to be fair. Build quality is also a step up from SM580. I've had Ncase, SM580 and SV590 and last...

I have some good news for anyone who wonder. 420 Corsair radiator fits without any issues if you set up fans in pull(so fans mounted to the case. Some reported issues with power cable or had to mount inlets upside down. If you mount fans in Pull, there is no need for that and power cable fits...

I think majority will buy DDC, I dont think it makes sense to do one for SPC.

Nothing stops you from using dual aio in sv590

Which version should I buy for Sliger SM580? 25cm right angle?