Recent content by S4YIND

Please tell me how much maximum W can it withstand at maximum cooler speeds? I want to insert a ryzen 9 9950x with a 180W TDP into such a configuration.

-30 all core is stable, -40 works, but sometimes it freezes, I think if there is -30 and -40 on another chiplet, it will be better!

I configured my Ryzen 9 9950x and got CURVA -40, 190W, 85C, 46,500ppt Cinebench R23. CURVA -30, 190W, 85C, 42,000ppt Cinebench R23. CURVA -20, 190W, 85C, 40,000ppt Cinebench R23.

Concerns only the fan mounting, the fan itself rotates freely! At 200W, it's spinning at about 80% of 3000, but it's pretty quiet compared to the Arctic P8 MAX, which accelerates at 4000rpm at 80C). So the loudest place I have is not the Noctua 3000, but the 4 Arctic P8 MAX case fans.

After reading a lot of things, I still replaced the motherboard with an ASUS B850-I. I had to work hard to find drivers for Bluetooth and wifi for windows 10!, they were everywhere only for windows 11. The B850-I allowed me to heat my ryzen 9 up to 200W! On the asrock b650-i motherboard, I had a...

I strongly advise you to assemble the assembly as I have, with the FL0600 600w server power supply, it absolutely does not heat up, does not make noise, and is more reliable than any external power source.

ok I have studied the problem thoroughly! Asroc released 3 bios updates to fix this, in the last one (3.4) they even fixed the socket voltage at 1.2v, and level3, although it used to be auto (alternating voltage), although all other manufacturers had static 1.2v for a long time. I conducted a...

I found the following information: read this: https://www.tomshardware.com/pc-components/cpus/asrock-confirms-its-bios-settings-are-killing-ryzen-cpus-is-fully-committed-to-fixing-any-damaged-motherboards

Thank you, I'll look into this issue, because my computer just crashed in the browser once, but I was doing Curva -40 at that moment, so maybe it was related to a lot of undervolting.

I think 300W won't be enough for a 160W processor and a 70W graphics card. Considering that, as a rule, these are not real 300W. I would recommend taking something more reliable for such an expensive piece of hardware.

During peak load, it makes noticeable noise. But this is the price to pay for 160W of performance in 5L, if you limit it to 75C in the bios, it becomes much quieter, and we lose 5% of performance. A 25mm fan is MUCH better than a 15mm fan under stress!

It was important for me to assemble a powerful portable (For daily wear) workstation, with the most productive system, noise does not matter to me. Compared to my work laptop, which has a Ryzen 7 8745Hs processor and 32Gb DDR5, this computer calculates a gear project in solidcam by as much as 3X...