Recent content by pslate

  1. pslate

    Production FormD-T1 (aka Sidearmd), READ FIRST POST

    Yep, just leave me a note! I didn't get to the flipped setup yet (SV590 build last week took too long) but will be measuring for it soon.
  2. pslate

    Production FormD-T1 (aka Sidearmd), READ FIRST POST

    Thank you so much! Appreciate the feedback as well! I'll get some pictures up here in the next couple days!
  3. pslate

    Production FormD-T1 (aka Sidearmd), READ FIRST POST

    They are Molex part number 39000078 and are also here: https://www.cable-sleeving.com/16awg-crimp-terminal-atx-female-mini-fit-jr The wire conductor wings are a little bigger so it's easier to crimp two 18awg wires.
  4. pslate

    Production FormD-T1 (aka Sidearmd), READ FIRST POST

    Thanks for the kind words guys, I assembled my case a few days ago but haven't put in the time yet re: cable lengths. With the virus concerns we've been prioritizing unfulfilled cable orders in case we have to shut down. If I'm forced to work from home again it will slow down production...
  5. pslate

    Production FormD-T1 (aka Sidearmd), READ FIRST POST

    Received mine yesterday! Hopefully will get some time with it in the next few days. Here's my relevant tracking info if it helps: 2020-03-18 12:19 LAWRENCEVILLE, GA 30043, Arrived at Post Office 2020-03-18 08:38 ATLANTA-PEACHTREE GA DISTRIBUTION CENTER, Arrived at USPS Regional Destination...
  6. pslate

    Production FormD-T1 (aka Sidearmd), READ FIRST POST

    It's marked as sold out because I'm not taking cable orders until March 2nd. But if you need one ASAP I can make and ship it. I have inventory on hand. Marking the cables as sold out is just the best way to stop new orders from coming in.
  7. pslate

    Prototype The world most flexible SFF case? LOUQE Ghost S1

    Sorry for the late reply, but all of the wires I use are 18awg. The insulation on the wire I use for sleeved cables is much thicker though which gives the cables a fuller look. Sometimes I use thinner insulation 18awg UL1007 wire for sleeved cables if the run is really tight or the cable needs...
  8. pslate

    Production FormD-T1 (aka Sidearmd), READ FIRST POST

    A big thanks to @Wahaha360 for including me in the test shipment! Really excited to create some custom length PSU cables for the case! Have had a lot of folks inquire about custom cables for the T1. If anyone has any questions let me know. Also, if any of the test shippers need a 16mm power...
  9. pslate

    Prototype The world most flexible SFF case? LOUQE Ghost S1

    The sleeved cables aren't made to fit with a 25mm thick fan below the PSU, but I've seen one customer do it: However it looks like that fan is set as intake while yours is exhaust. I don't think the cables in the picture above would clear with the fan as exhaust. If you want a 25mm thick fan...
  10. pslate

    Production Sliger SV590 and SV540 - Vertical SFF Cases!

    That sounds good to me! ;) I also have some builds in the SM570 and Cerberus I need to share.
  11. pslate

    Prototype The world most flexible SFF case? LOUQE Ghost S1

    Happy to send one of the 3D printed parts if you can throw a couple of bucks my way.. send me an email to [email protected] if you're interested!
  12. pslate

    Production MJOLNIR: The minimalistic – but not boring – 9.7L Case

    Just backed, congratulations on the campaign!!
  13. pslate

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Thanks a bunch! 😊 The cables are for PSU fan facing the window/right side panel only at the moment. I am considering adding PSU fan facing GPU as an option but that requires some remeasuring of lengths for each PSU model. Going very well, getting a bit cramped running everything out of the...
  14. pslate

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    You can order from the Dan A4 listings if you are looking for unsleeved cables. For all sleeved cables the normal SM550/SM560 listings will work for all SM series cases. My SM570 is scheduled to be delivered Monday so I'll get pictures up when I receive it. I'll work to get unsleeved up under...
  15. pslate

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    24 pin and 8 pin CPU/EPS for the motherboard and PCIE cables needed are dependent on the GPU model you have. And you can add on SATA cables for any 2.5" or 3.5" drives. Yep, there was a great reddit post yesterday with some comparison pictures. Those are the unsleeved cables for the Dan, but...