Recent content by Poblopuablo

Is this now delayed with everything going on?

If using the Iceman externally, will there be an opening for the tubes at the rear of the case?

Those should be stickers!!

How low profile are we talking? With a pump and heatsink on the pump?

https://www.moddiy.com/products/Computer-Case-Extension-Cord-Power-90-Degree-Angle-Extension-Cord-40cm.html Something like this?

Not sure where you're located, but it's available on amazon US.

Just a heads up when most companies(ADT Link and link-up) say "180°" for the pcie cable they refer to a straight cable. For what I got, and what I pictured, they consider it a "360°" or "reversed" connector. The angle of the connector is relative to the cable coming in to said connection point...

In the event that it is my vrm/mosfet/power deliver on the Mobo causing issues I added a 4010 fan and some extra heatsinks. Doubt it'll help since the fan is about 7mm from the 60mm rad. Also modified the GPU cooler to have the tubes come out the bottom, then flipped the rad so the tubes are on...

Link is dead/ error 404 Found thing 4936774, and 4936776 but nothing for 4936775 :/ thingiverse sucks sometimes, could you post on thangs or dm/email me the stl?

Do you have the stl for this?

If I put the tubes at the top there will be a lot of clutter since the tubes are so long. :( Just found this model of pcie riser with 108mm hole spacing.( Which is what this prototype used) Available on amazon (ships from china) or from AliExpress. Otherwise I could this "20cm with...

Initially it wouldn't boot, but after pulled the riser out, it booted fine, so when I put it back in, I didn't screw it in all the way. And it seemed to help. What doesn't help is my GPU aio orientation. Since it's an aio the tubes come straight out, and can't be modified w/o a new rad. This...

I finally after a year and a half after getting a prototype finally built it. I am having a weird issue, but not sure what is causing it. It crashes to a full system restart. I upgraded to a 5600x and to different ram, so I'm not sure if that is the issue or if it is motherboard cooling...

I have my s401 white edition listed a couple post below if you're interested. :)

I really don't want to split up the set, or ship 2times, but I may. Although, the custom cables won't work unless you have a console style case, and I don't know if I have the original cables.