Recent content by paulesko

  1. paulesko

    NCASE M1 V6 info

    Hope you can see them properly. If not, justo tell me and will upload to another place. As you can see there is barely room for one of the smallest heatsinks I found. In fact if you put a bare ssd there, It will touch the side panel with the help of a heatpad... In my case the side panel is very...
  2. paulesko

    Discussion high power small psu options.

    I´m a bit outdated it seems https://www.coolermaster.com/catalog/power-supplies/v-series/v-sfx-platinum-1300/ another option from cosel, this is a very DIY option https://www.prbx.com/2023/02/cosel-gha700f-high-power-density-700w-3x5inch-power-supply/
  3. paulesko

    Discussion high power small psu options.

    look into this thread, maybe now there is a newer more powerfull model of PSU but IMO that´s the better option. https://smallformfactor.net/forum/threads/complete-s4max23-worlds-smallest-4090-build-brickless-5l-s4mini-4090fe-7950x3d-800w-water-cooled.18499/ Also you have these two silverstone...
  4. paulesko

    Log Jonsbo A4 dual rad build

    Have not seen it, but the guy is serious, it could have some interesting information
  5. paulesko

    Log Jonsbo A4 dual rad build

    I have a Ncase M1 and if you fin one used, you could put the new alphacool 45mm new radiator on the side, that seem to work almost as good as 60mm ones. and I´d say it will fit (barely) https://www.techpowerup.com/review/alphacool-nexxxos-hpe-45-full-copper-360-mm-radiator/
  6. paulesko

    Log Jonsbo A4 dual rad build

    Can´t help much with that. I´m not up to date on the case wortld right now. I know that fractal has a couple of interesting ITX cases, and also the usual suspects like FormD Ncase and Dan cases, but I don´t know the availability situation with those. Sliger may have something also... take a look...
  7. paulesko

    Log Jonsbo A4 dual rad build

    yes, it´s enough. The problem it´s not in the cooler. I donlt have much experience with 7 series myself, but I have build a pc for a friend, and I noticed the chip (7950x) went straight to 90 degrees under load. I took some radiators, fans and a cpu block to build a improvised and overkill water...
  8. paulesko

    Log Jonsbo A4 dual rad build

    I would watercool the 4090 and also delid the 7800x3d. It´s a bit risky, but with these last ryzens there are a lot of tools to do it so not so much of a problem imo. There are huge gains to be obtained from delidding. You can also put the fan on the noctua on exhaust mode and that way all the...
  9. paulesko

    Advice Fully water-cooled 4090 build

    well I´m thinking that maybe you could buy a louque ghost, and a watercooled 4090, with an aircooled CPU. But you need to buy the case + a "top hat" to place the radiator+fans.
  10. paulesko

    Advice Fully water-cooled 4090 build

    I see, it´s the same problem here in Spain pricewise. The components you choose fr your build are ok, top of the line gaming pc, very very nice. What I´m not sou sure is if you can match the size you want with the power of your rig, because if the FormD T1 is the biggest you can go, there is no...
  11. paulesko

    Advice Fully water-cooled 4090 build

    I dont know the case very well but be very carefull choosing the AIO, because it may not fit. Also you can consider using this block+pump and add a good radiator. You can make your own AIO that way, and probably get a better performance...
  12. paulesko

    Advice Fully water-cooled 4090 build

    I have a 3950x with a 3080 ti with dual radiator on a Ncase M1, if you are in for this journey I think you have to take in mind some things: - The amount of money you may spend buying things that you are not seeing now is not small (specific reservoir comes to mind, a lot of fittings, a fast...
  13. paulesko

    Advice Louqe Ghost S1 & 7900XTX universal block

    I agree that yes, vram needs active cooling. look at the problems that first versions of 3090 had with those vram modules on the back of the pcb. Will it work without active cooling? Yes Do I think that fittings touching the lateral panel is a much lesser problem that vram not cooled properly...
  14. paulesko

    Advice Louqe Ghost S1 & 7900XTX universal block

    I have my ghost s1 here, and according to the measurements on the EK pdf, it would fit, so you could go for it I believe.... https://www.ekwb.com/shop/EK-IM/EK-IM-3831109904114.pdf