Recent content by Neptimus7

  1. Neptimus7

    Production Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    With the v12 revision supporting 125mm+ SFX-L PSUs, is it still worth it to go with a standard SFX PSU when SFX-L PSUs offer niceties like fanless operations and higher wattage? Specifically looking at the SilverStone SX700 or SX800, which is 130x125mm The only thing I can think of is having...
  2. Neptimus7

    Production Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Also, I for one am not upset about the new shipment date, and I doubt I'm the only one. We all wanted a Christmas build, but there's no stock of anything (except RAM). What's the point in having a shiny case if there's nothing to stuff it with, ya know? Just keep on with the updates; the...
  3. Neptimus7

    Production Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    I'm confused about the lab situation. Are the results expected before the Christmas shutdown? And why would production happen before the results get back?
  4. Neptimus7

    Production Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Also, y'all need to quit buying the Corsair SF 750s. I want one too!
  5. Neptimus7

    Production Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    I'm honestly fine with whatever screw, as long as it's easy to know which driver to use. This is true only because they're quality screws. I will say that Philips is probably the least easy screw to work with, and it can be difficult to keep the driver seated. One thing to keep in mind is that...
  6. Neptimus7

    Production Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Would people be interested in a group buy of mesh filters?
  7. Neptimus7

    Production Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    For everybody going on about a two-tone, I'm sure once the second batch comes out there's going to be people willing to do swaps. @WinterCharm congratulations on a successful Kickstarter!
  8. Neptimus7

    Production Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    We're two backers away lol. I just double-checked the dimensions of the case... it's WAY smaller than the photos/renders make it look. GJ to WinterCharm! Can't wait to build in it.
  9. Neptimus7

    Production Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    I'm honestly not worried. There's still a week to go (i.e. plenty of time for LTT to do a video, assuming no further shipping delays), and Kickstarters usually have a sizable boost within the last couple of days (using the Remind Me feature sends an email two days before it ends).
  10. Neptimus7

    Production Mesh-Licious - 14.5L Vertical, 280AIO mainstream case

    So why'd you give us a notification for the thread???
  11. Neptimus7

    Prototype FormD T1 EVO (aka T1 V2.0 and P1)

    Make sure this gets on the first post, people will be very interested in the lower-priced case (especially if available at such mainstream outlets).
  12. Neptimus7

    Prototype FormD T1 EVO (aka T1 V2.0 and P1)

    Personally, I want a horizontal case that can fit under my dual-monitor setup. The T1 is a little small for the hardware I want to run (although maybe with the distro plate it'll work). If it's possible to do two layouts that would be amazing, otherwise I'll probably have to look at other cases...
  13. Neptimus7

    Prototype FormD T1 EVO (aka T1 V2.0 and P1)

    I guess the thing is that this case was our shot at getting a clean mini-ITX build that supported 240mm rads. As far as I know, the only other case out there would be the Ghost S1, but that suffers from a lack of airflow, poor availability, and high prices (to add the necessary hats).
  14. Neptimus7

    Prototype FormD T1 EVO (aka T1 V2.0 and P1)

    Yeah except I don't want my case to have to be a meter away from me ?
  15. Neptimus7

    Prototype FormD T1 EVO (aka T1 V2.0 and P1)

    So, I know the overall drive seems to be towards a vertical case. However, for those with ultrawide/multi-monitor setups, this may mean having to put the case behind monitors or under the desk, which would be awfully sad, unless there was a way to lay it on its side.