Recent content by Nanook

  1. Nanook

    Off Topic Computer Building OCD

    Aura Sync should be able to set all your lights to red. There are also a UEFI setting to turn off rainbow while the PC is in Sleep mode.
  2. Nanook

    Production The Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Water cooling is a very deep rabbit hole. Props, and good luck :)
  3. Nanook

    New skyreach owner, few questions

    I have both, and no real benefits if both are genuine 330W versions.
  4. Nanook

    Nanook's build log (9900K / Asrock Z390 / RTX 2080Ti)

    I knew that would get your attention :)
  5. Nanook

    Nanook's build log (9900K / Asrock Z390 / RTX 2080Ti)

    Small update... I switched the top fans to the NZXT fans, as pull intake. XMP to 3000 UEFI set to auto on most settings Load line set to level 5 (low voltage) CPU idle around 33 CPU load (small FFT) around 80 GPU idle around 40 GPU load (Gaming) around 70 Using CAM to run all fans on...
  6. Nanook

    Nanook's build log (9900K / Asrock Z390 / RTX 2080Ti)

    Nice find! I love this. My first SFF build was just like that, shoving dual 120 AIO, and a Grid+ in the M1. :) Perfect use-case for the solid panel... but hey if it works, right? :)
  7. Nanook

    Production The Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    There are 6-10 screws (2 in front, 2 in back, 2-6 on the sides) to remove before you can remove the top sub-assembly. I can’t remember exactly how many on each side you have to remove to get the top sub-assembly off.
  8. Nanook

    Production The Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Yes pretty tight in there. Have you tried the space between the chassis front and PSU? or behind the PSU? Neither will be easily accessible with the PSU bracket / chassis spine.
  9. Nanook

    Nanook's build log (9900K / Asrock Z390 / RTX 2080Ti)

    It’s actually not so bad. My main complain is that I can’t have the SF750 fan facing outwards. The PSU bracket interferes with the switch on the SF750.
  10. Nanook

    Nanook's build log (9900K / Asrock Z390 / RTX 2080Ti)

    Most NIC max operating temperature are 55c, some go up to 70c. If I’m moving / copying files, temps should be ok with the gpu mainly idle. With photo editing off of the 10gbe NAS, the gpu will also be running along with the 10gbe NIC - granted the gpu won’t be running at gaming utilization.
  11. Nanook

    Nanook's build log (9900K / Asrock Z390 / RTX 2080Ti)

    Thanks! Do you think the heat will break the 10gbe NIC? I’m thinking to get a NIC with heatsinks that allows vertical airflow.
  12. Nanook

    Nanook's build log (9900K / Asrock Z390 / RTX 2080Ti)

    Thanks! This is the 5th case?