Recent content by Lakimakromedia

Gold shovel for me :D : Its pretty late for such thing, and pictures are not avalaible anymore. But First let's compare size versus Node 202, mini ITX case from Fractal Design. This case is pretty small while in horizontal stand (10.2l), however in vertical stand (due to large base), its...

Anyway u need to solder wires to PS, u cannot drill those plate - i did this, and i regret it... (psu not working like it supose to anymore)

All Aio has straight burb connections on rads, and this is problem. Maybe some with slim rad will be ok.

I'm also curious how much, if it's more convenient for You order from China instead of local workshop. Maybe I'm missed, what software are You using for modeling?

If u are interested in watercooling RTX4000, Barrow block for 2070Fe is fair chose. It's interfere with one electronic element. Everything else fits. U need only cut one piece of block in marked place, Block is too long for 5mm ;). Ah, and also put those extra washers on back near GPU...

Answer is simple, use Pico PSU. Use this server psu, adapter, or just solder by yourself connection, and Pico. My node with server psu

Unfortunately don't know what I messed up, but when, soldered extra connections, wire like before and start togheter with Pico, PSU gives 13V. Don't start anymore like before > 6.7 (pin2)12V (pin3), now only 13V (pin3) ;/ No idea, maybe overheat some path/element during soldering or...

130mm is on pcie side, EK has terminal od rad side. 2070 with block has 180mm, so it's less than 217mm. But more on side with pcie, BCS there is terminal. I saw lately slim terminal from barrow. Maybe this is solution fol older rtx. 30xx series should be fine.

Hi, maybe You can help me ;). I have HP (DPS-800AB-11 A) PSU, 800W - not like petricor ;) just little wider (that PSU in Europe cost almost 250$... This HP cost me 65$) So, finally I started it without burning [with petricor method ;) ] A. If I connect pin 2 to ground I have on output 6.7V. If...

Paint the panels to white or something and will be perfect :).

Did you heard about Intel ATX12VO? This thing can make server psu much more usable :) (no need for Pico PSU).

How much and what?

nvm to be deleted

Why on top? I said 180deg not 90. Pcie will be on top, instead on bottom. Gxr-one looks like idea of PSU from this thread https://smallformfactor.net/forum/threads/s4max-brickless-s4m-w-2080ti-and-r9-3950x-800w-water-cooled-working.11277/page-15#post-234096 :) Just flex PSU used as base.

Next build/ time maybe rotate 180deg MB to have 24pin conn. o bottom and make cables shorter? :) (If you decide to use flex again :)