Recent content by K888D

  1. K888D

    Prototype Lazer3D LZX-Series (CNC, Triple Slot, M-ATX)

    Sorry for the lack of updates, we've run into some stock issues with certain components due to worldwide shortages, the shortages also affect this LZX-8 case. Originally I had hoped to have it launched and shipping by the end of April, but we are currently building up a backlog of orders for...
  2. K888D

    Prototype Lazer3D ST8 - Slim Tower Case

    I wasn't personally aware of a looming PCIe 5.0 spec, but like you say the GPU performance increase from 3.0 to 4.0 is minimal so a further version doesnt seem neccessary. The main issue from a manufacturers perspective is the Motherboard/Riser/GPU compatibility issues and the customer service...
  3. K888D

    Prototype Lazer3D ST8 - Slim Tower Case

    Hi there, it's on hold at the moment while we concentrate on launching the LZX series of cases. I'm not sure if it will be picked back up at the moment, one of the main reasons for putting this on hold is due to the situation with PCIe 3.0 and 4.0 risers.
  4. K888D

    Production Lazer3D - LZ XTD - Alternative Designs

    With the LZ7 and this case, the bottom edge of the 140mm case fan pushes some air under the motherboard if you set the case fan as an intake (positive pressure). From my very early LZ7 testing I found the M.2 drive temps to be very reasonable when mounted to the underside of the motherboard...
  5. K888D

    Production Lazer3D - LZ XTD - Alternative Designs

    I don't think this feature will be making its way to the LZ7 and LZ7 XTD lineup of cases. However the LZX-8 will be getting an extended version / upgrade kit down the line, probably later this year, which will have the same Type-C hub as the LZX-8.
  6. K888D

    Production Lazer3D LZ7 - Quiet Gaming Cube PC Case

    Hi there! If the 140mm case fan is set to exhaust then it will reverse the airflow direction of the case from the left (GPU) side to the right side. This should mean slightly lower GPU temps, but will result in higher CPU temps as the GPU heat is pulled across the motherboard and into the CPU...
  7. K888D

    Prototype Lazer3D LZX-Series (CNC, Triple Slot, M-ATX)

    Thanks for the support, stay tuned for more details! I'll be posting an official update with timescales and availability shortly. Upon launch it will be available exclusively direct from Lazer3D, but this may change down the line.
  8. K888D

    Prototype Lazer3D LZX-Series (CNC, Triple Slot, M-ATX)

    Thankyou, I've corrected that and will get it uploaded shortly. The reason for not including the feet is there are a selection of different feet to choose from of different size and heights, also some people prefer not to add feet if they need to fit the case into a tight spot for example...
  9. K888D

    Prototype Lazer3D LZX-Series (CNC, Triple Slot, M-ATX)

    Hey everyone, We're getting closer to launching the LZX-8 and I'm excited to show you the first draft of the User Manual (linked below), please take a look and let me know if you have any feedback or suggestions to improve it and I'll do my best to get them included. I'm hoping to send it off...
  10. K888D

    Production Lazer3D HT5 - Low Profile APU Case

    Love the milk ha, thanks for sharing!
  11. K888D

    Production Lazer3D LZ7 - Quiet Gaming Cube PC Case

    Hi there! The switches use a standard M16 nut, your local Amazon should sell them, or alternatively I could you ship you one if you're really stuck for it, although shipping may be expensive just for a nut if you're not located in the UK?!
  12. K888D

    Prototype Lazer3D LZX-Series (CNC, Triple Slot, M-ATX)

    I'm hoping to have it ready to order by the end of February, can't guarantee that though as there's alot of behind the scenes work left to do!
  13. K888D

    Production Lazer3D LZ7 - Quiet Gaming Cube PC Case

    Hi there Branden, welcome to the forum and thank you for the comments! We've only just received the order from OcUK for more of the pink corners, so unfortunately it will likely be around 6 - 8 weeks before they are back in stock. You should be able to ask them to change your order if you...
  14. K888D

    Prototype Lazer3D LZX-Series (CNC, Triple Slot, M-ATX)

    Hey @jpetso welcome to the forum, and thank you for such a detailed post, your thoughts are very much appreciated! I can see what you're saying with your space constraints why a cube style case is a good match for your setup. The LZX-8 will measure (D)215mm x (W)245mm x (H)160mm (8.4 Litres) -...
  15. K888D

    Production Lazer3D - LZ XTD - Alternative Designs

    That may be possible to do, although by that point I'm not sure how elegant the front of the case would look with the Expansion kit spaced with washers lol. There have been some recent announcements of true ITX 3060 cards from NVidia, more information can be found here, including a new version...