Recent content by iksretep

  1. iksretep

    NCASE M1 6.1 4/S (Los Angeles/Orange County)

    POST REMOVED Please check the Buy/Sell/Trade section for rules @iksretep
  2. iksretep

    NCASE M1 V6 - X570 Impact

    Awesome build! What type of powder coat did you get on your M1 ... I'm looking to powder coat my V6, but I was told thickness/texture can cause some issues with fitting the panels back on.
  3. iksretep

    Chimera Industries Cerberus: The 18L, mATX, USA-made enclosure

    Are you talking about the silver hinge part? You can swing open the bracket and lift it off without removing any screws/rivets ... yes you are left with a piece of silver hinge on the case frame, but the bracket is completely removable. If you're talking about the screws that are holding the...
  4. iksretep

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Sure ... was it by any chance the PC building guide by The Verge? 😂
  5. iksretep

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Besides esthetics of having custom length PSU cables making things look tidy, did anyone note temp differences with stock vs. custom cables? Are the temp differences marginal or?
  6. iksretep

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    With windowed panels I'd imagine all that warm/hot air from your 280 aio would just go right on top of the motherboard/gpu/etc ... what are your plans as far as cooling your GPU keeping in mind that you have windowed panels? Bottom fans as exhaust? I'd play with it, but with windowed panels you...
  7. iksretep

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    @tunafich I was hoping to mount a short ITX style GPU, I currently have the Vega 56 Nano which replaced my R9 Nano. So Sliger has the 92mm bracket that mounts on the bottom towards the rear, as well as a bracket 120mm bracket that mounts on the side of the case towards the front ... First I was...
  8. iksretep

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    With the SM560, do you guys know if it's possible to run a 120mm AIO (via the adapter) and the 92mm AIO (via the adapter) at the same time? I wonder if anyone has tried and if tubing length looks ok. I'm only thinking of cooling a 65TDP CPU and an ITX GPU.
  9. iksretep

    NCASE M1 Planned Setup - Build Check

    When I built my M1 few years ago I quickly learned that having temps in check was key to keeping my machine quiet, after all I wanted to have the M1 sitting next to me on the desk. I ended up with a non-K CPU and an ITX style GPU, because I quickly learned that a K CPU generated more heat and a...
  10. iksretep

    Need some help regarding a DAN A4- r3

    My suggestion would be to find a powder coating place that deals with small jobs for a reasonable setup fee ... from experience - I've spent nearly as much time/money trying to paint aluminum myself as it would be to powder coat, and I was never happy with the results. If you go with powder...
  11. iksretep

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    @performancecomputer thanks for taking the time with it. I have a bunch of questions. I can't help but notice the bulge on the side panel 😕 what is causing it? Custom length cables are almost a must, no? Do you think there is room for two of the 92mm coolers? I'm also interested to see your test...
  12. iksretep

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    @thewave1408 Sorry, I wasn't talking about not having vents in the top panel. I was talking about not having a "large" cutout in the panel - but instead having a bunch of cutouts in the panel itself (be it round, or elongated). Sort of like what the vented side panels look like - there is no...
  13. iksretep

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Thanks for the photo! Great looking case! @wsgroves it wasn't about price, but more so about esthetics ... too bad about the top panel having a large vent cutout instead of a uniform look ... I was looking to build a baby brother for my cebrerus. I'll wait to see what kind of panel options are...
  14. iksretep

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    580 is a great looking case! I'd be interested to see the choices of panels ... top, sides? Side solid, top perforated like the current one on the Cerberus? If I was able to throw in my two cents, I'd be interested in a version with just the power button on a perforated top, and no I/O ... just...
  15. iksretep

    NCASE M1 V6 info

    Is there a chance you could tease us with some sort of a render, photos, etc. that would showcase some changes? I'm mostly interested in the side panel redesign as far as vent holes, and color options if any like white panels, black top? Plugs for the rear or perhaps extending the rear vents...