Recent content by Ganymede

@tinyitx Yes, I don't feel mislead as the manufacturer doesn't hide anything, but I was just disappointed by the fan's noise. Thanks for the tip about the low-noise adapter, I will try it later to see how it fares. I will probably unscrew the fan from the heat sink altogether as it does not...

To be honest the fan mounted on the heat sink is too loud for my taste (you can't control the rpm), so ultimately I left it unplugged. Despite this, it did not affect the temperature of the drive... Probably fans mounted on the AIO radiator were already sufficient (they blow in the direction of...

Yes and to tell the truth I solved this problem just a few days ago (prior to this I just didn't have time to take the computer apart and reassemble it again). I replaced the original thermopad on the chipset with a Grizzly Minus Pad 8 (30 x 30 x 1,5 mm – I had to cut it down (15 x 15 mm) to...

Thanks for the input. Poor airflow is a possibility, over the weekend I'm planning to test the system further in an open air environment so I will see if it's really the case. Yes, the air from the AIO blows onto the mainboard, however it's relatively cool as I'm stressing only the SSD during...

Hello, I would be grateful if forum members who have a B550 motherboard in their NCASE M1 could share the chipset temperatures on their motherboard, especially those with an ASUS board. Ideally in pair with temperatures from the front NVMe M.2 drive if present. My story: Recently I've...