Recent content by fatpolomanjr

Is there turbulence noise from the side panel being too close to the fans? Assuming you can close the side panel without the backplate. Fitting is one thing; working well is another.

Not sure how you can move the motherboard closer to the psu without compromising on the length of compatible graphics cards, since the pcie slot is in a fixed location on the motherboard. It looks like the Ncase allows enough room for the rear fan by having a larger width.

Case is looking great. Is the intention to fit one or two rear 92mm x 14mm or 25mm intake fans with the C14S? That's the idea I get from the picture in the OP:

Audio through the front, and front i/o through the back. I don't have a great picture but maybe you can get an idea.

2.5 slot gpus can fit 25mm fans if you remove the shroud. Anything higher needs to use slim 120mm fans. That gpu is 2.7 slots, but I've seen deshrouded 2.75 slots fit with slim fans.

I have a Gigabyte B360n motherboard, and apparently they've disabled BIOS control of long power duration limit at Intel's request, without the option to roll back to a previous version with the setting. Is it possible to do this with software like Intel XTU? I could only find decent prices on an...

I'm not sure there were different power cable lengths shipped with the M1 v6. I did have to do some careful routing near where it connects to the psu. Maybe that accounts for the shorter distance you're seeing? You can see the extra slack in the bottom right of the pic.

I have a picture of this solution I posted a few pages ago:

L9a has noise issues with an NF-A9x14? I've only heard of noise issues coming from the A9x25 and the cryorig c7 (any variant) with stock fan. The 92mm slim fan is fine. The duct is for better temps by preventing hot air from recirculating through the cooler. Personally, my L9a was fine, with and...

This was my experience with a Dan case and these adhesive rubber feet from amazon I stuck on the top (flipped bottom) of the case. It would be nice to preserve the aesthetics, but the only cases that supports flipping the insides are the Mjolnir and the Dan C4; the latter of which is only a...

That sounds interesting. A pic of this would be really cool.

Stock sleeved cables from a Corsair platinum sfx power supply go pretty nicely with this case. I have a massive C14S, an accelero iii 1080 Ti, and 2 x 120mm Noctuas on the bottom, and was still able to route them in a nice way.

I can't tell you much more than the specifications, since I've since shoved everything back into my Dan case for now. Measuring the C14S alone I can only tell you that 42mm is the measurement from fan to cpu. Which is already clear from the specs.

I can confirm the ram height when I get home today, but as far as I know the only confirmed motherboards with sockets that are too tall are a few of the X570 boards.

I didn't even think of this potential issue, since I figured having the fans as exhaust negates the need for the dust filter. Thankfully Warside already replied it does fit.