Recent content by Diamorif

  1. D

    Discussion Performance per litre - Round 4

    All of that info should be in the imgur link and the feet appear to be 1-2 mm.
  2. D

    Discussion Performance per litre - Round 4

    I dont have a metric measuring tape and was going off the listed dimension, if anyone has the actual dimensions, happy to redo the scores
  3. D

    Discussion Performance per litre - Round 4

    So if I messed up the math, apologies. case is a K39 v2 dimensions 220x180x100m 3.96L (https://www.aliexpress.com/i/4000333781136.html) CPU is a R9 3900 and the GPU is a Galax 2070 Mini Cinebench - 6359 Octane - 211.81 Timespy - 8761 1st calc =70696.7951117 2nd calc = 1709.19851302
  4. D

    Log Asetek 645LT + 297mm gpu length + Dan A4

    That's a solid card. I used it in a build for a friend (https://pcpartpicker.com/b/TBZfrH). If you get it, make sure to install the updated drivers ASAP, a lot of the earlier cards had an issue where only one fan would spin and make the card cook itself.
  5. D

    Log Asetek 645LT + 297mm gpu length + Dan A4

    3700x is right on the cusp, it runs pretty hot on air without some tweaking but is manageable without having to mess with the 645. I got a bunch of my info from Glob3tech's entire series on the case He does a bunch of testing on the 3700X on air and water and the results there should be...
  6. D

    Log Asetek 645LT + 297mm gpu length + Dan A4

    Which cpu are you going with? If it's anything above a 3700x, go with the 645. if not, try the blackridge, c7g or axp 90. I just did a build with the loser card mod, and it works great. in either the stock config or with the mod, make sure to install the aio before the PSU. it'll save you a...
  7. D

    Advice K39 Case-Mod Fan Bracket Cooling Kit mounted in PCI Slot for case exhaust fan(s)?

    you can also just attach a 120mm or 140mmx15mm slim fan to the side with screws/noise dampening mounts and still use the pcie slot for activities. I had an APU build with a 645lt that used a 2 nvme pcie card in one slot, a 100mm scythe slim fan over the pump and a 120mmx15 noctua as exhaust in...
  8. D

    Tips for bending heat pipes to make cooler lower profile

    Hi all, I'm looking to find a way to get an AXP 100 to fit in a K39. i came across a Reddit post () where someone else got the height down to clear in a similar Geeekcase. Wondering of anyone has experience doing this/has any pointers. I don't want to break the cooler (shipping from China...
  9. D

    Log Nano-ITX or Micro-ATX PC build

    Or if that's too limited, a k39 with a 3600 and 16 series itx gpu
  10. D

    Log Nano-ITX or Micro-ATX PC build

    ryzen 3000 or 4000 apu in an inwin chopin, 3000 is available for a song right now.
  11. D

    Concept Salvo Studios S402: ~9L Steel Console Style Case

    Hey, this is my build. Though I'd share some photos and parts for the build. Pictures of the back(). This was done using a Silverstone TD03 Slim. The orientation of the tubes dictated the layout but the performance has been great. As you'll see, the fans have been mounted on the exterior of...
  12. D

    Log Chromaxed Losercard Modded Dan A4 V4.1 - R9 3900 2070 Super Mini

    First build post on the forums. I'm particularly proud of this one and hassled a bunch of people for advice on the mods, so figured I'd share with some notes. Photos are here Finally completed what will more than likely be the final form of my Dan A4. Firstly, a moment of silence for my Zotac...
  13. D

    Dan A4 120 MM fan over motherboard

    It did work and didn't require any holes, just had to remove the io cover on my motherboard and route cables and AIO tubes before inserting the fan and bracket
  14. D

    Dan A4 120 MM fan over motherboard

    sorry like this (https://www.google.com/url?sa=i&url=http://3.93.225.88/r/sffpc/comments/in3tj7/dan_cases_a4_is_filled_70l72l_top_fan_5_x_nfa12/&psig=AOvVaw2f4K_xOiXKY5kudR4laR4c&ust=1601733694213000&source=images&cd=vfe&ved=2ahUKEwia4puQiZbsAhVQgHIEHRNYCtUQjRx6BAgAEAc) but with holes drilled...
  15. D

    CPU Looking for an alternative to the SF750

    With that set up, you should go for the sf600. I've been running the same gear listed above with an x570 rather than b550 mobo off a 600w flex atx psu for a few months now with no issues (https://pcpartpicker.com/b/sjp8TW). the sf600 im running in my dan a4 is running a 3900, b550 and 1080 ti...