Recent content by AlexTzone

  1. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    Heey guys, finally started to get back some fully finished and anodized parts. We’ve also started doing some pre-assembly :)
  2. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    Btw, new production update 😁
  3. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    We use 18cm double-reversed cable, but you may want to go 18.5 or even 19cm to be on the safe side. I'm not 100% sure every riser manufacturer measured their cables from the same positions.
  4. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    The BORG shells are CNCd, so today we tested how they fit inside the packaging foam! Not surface finished yet, but exciting to see the BORG taking shape 😁
  5. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    Thank you for believing in us, really heartwarming to hear! Before we move on past MJOLNIR we're going to re-group a bit and fix some obvious flaws (mainly communication, support and production timelines), as I can see that we're designing some pretty mind-blowing stuff behind the scenes but...
  6. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    The BORG is being CNCd, you can see the top part of it in the post just above yours (the last 2 pics are BORG top parts).
  7. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    New production update, the last 2 pics are actually a part of BORG:
  8. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    Very sorry it has taken such a long time, we will fix your issue. Everyone with problems from earlier batches has been parts of this new batch, so anybody with broken panels, glass, electronics or similar is going to receive their replacements when this batch is ready for shipping.
  9. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    We're shortly about to send all the parts to the anodizing factory for final bead blasting, polishing and anodizing. Then the assembly process will finish it up. The anodizing can take 15-30 business days and assembly about 2 weeks based on past experience. This new batch will be beautiful...
  10. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    New production pics posted just now, I’ll be back with more in the coming week:
  11. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    In my experience the Booster Cell should be set to exhaust, especially if you have an open-air GPU like most of us have :)
  12. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    Hi guys, production update! Sheet metal, fasteners, etc are finishing up and will be heading over to our assembly factory some time next week. Electronics are on track for the last week of June. However, the Shells (and BORG shells) are taking longer than expected so there’s a risk we’ll be...
  13. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    Same with that, June :)
  14. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    Oh damn, I forgot to add the emails of everyone from the replacement doc to the email that was sent yesterday. But yes, we're producing everyone's replacements atm and they are also estimated to be ready in June!
  15. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    Freaking unbelievable!! Thanks so much guys. So happy Linus was impressed with the build quality, structure and finish. If he’d only mount the Booster Cell PCB the correct way (not upside down), everything should have worked normally in the end 😅 Strange, I made sure to add email of everybody...