Normal
The AGP riser has a possibility from here https://www.moddiy.com/products/AGP-16X-8X-Extension-Cable-Riser-15cm.html?srsltid=AfmBOooHE86CeZyqoryRDAVUFzIwORKKx6l7vPVq1ILwmxqxu7WQcUIf but it likely won’t be able to handle the 90degree bend. I may end up keeping the upside card orientation and figure out how to customize the PCI brackets instead.For the ISA riser there are some DIY options (vogons forum has good leads) but again right-side up orientation would be difficult. I could start with this on the motherboard side https://oshpark.com/shared_projects/cG4aZUEgI could also consider modding the case itself to accommodate card brackets instead either orientation. It seems like it should be possible but I hesitate to mod an expensive and lovely case For the cost of a fancy PCIE riser:$90 for one, that might work without modification https://www.douglaspcb.com/media/spec_data/W-67.pdfFit test placement Need to find my soft measuring tape to see if the AGP riser would reach....IMGUR link
The AGP riser has a possibility from here https://www.moddiy.com/products/AGP-16X-8X-Extension-Cable-Riser-15cm.html?srsltid=AfmBOooHE86CeZyqoryRDAVUFzIwORKKx6l7vPVq1ILwmxqxu7WQcUIf but it likely won’t be able to handle the 90degree bend. I may end up keeping the upside card orientation and figure out how to customize the PCI brackets instead.
For the ISA riser there are some DIY options (vogons forum has good leads) but again right-side up orientation would be difficult. I could start with this on the motherboard side https://oshpark.com/shared_projects/cG4aZUEg
I could also consider modding the case itself to accommodate card brackets instead either orientation. It seems like it should be possible but I hesitate to mod an expensive and lovely case
For the cost of a fancy PCIE riser:
$90 for one, that might work without modification https://www.douglaspcb.com/media/spec_data/W-67.pdf
Fit test placement Need to find my soft measuring tape to see if the AGP riser would reach....
IMGUR link
