Reply to thread

Message

this is just my inference of his comments in the video, also factor in previous videos and builds - he can't be bothered to do a full custom loop because W1 does not make his shortlist of potential housing for his permanent build
M1 and T1 were housing his main build for certain time period - multiple videos, multiple loops with different components and upgrades
Meshlicious was a main build candidate - couple of videos and 1 bad ass hardline loop
C4 is going to get loop only because it's so similar to the M1 that I think that he thinks it can be a replacement/sidegrade, plus the temps in his testing were not really satisfactory so he wants to try dual 280-rad.
W1 not even in the list due to various reasons listed out in the video - majority of which you're addressing in B2. But IMO his biggest issue is the visual of the vent holes. The side panel is the first thing you look at when the case is on the desk and if it's not catching your eyes then that's that. And now the price tag comes in again as that set the initial expectation so high that when the case is not perfect the letdown is real.
hopefully you can keep improving the case with later batches and revisions. W1 is on the right track, just need to keep moving forward

<blockquote data-quote="thelaughingman" data-source="post: 249699" data-attributes="member: 8234">this is just my inference of his comments in the video, also factor in previous videos and builds - he can't be bothered to do a full custom loop because W1 does not make his shortlist of potential housing for his permanent build<ul>
<li data-xf-list-type="ul">M1 and T1 were housing his main build for certain time period - multiple videos, multiple loops with different components and upgrades</li>
<li data-xf-list-type="ul">Meshlicious was a main build candidate - couple of videos and 1 bad ass hardline loop</li>
<li data-xf-list-type="ul">C4 is going to get loop only because it's so similar to the M1 that I think that he thinks it can be a replacement/sidegrade, plus the temps in his testing were not really satisfactory so he wants to try dual 280-rad.</li>
<li data-xf-list-type="ul">W1 not even in the list due to various reasons listed out in the video - majority of which you're addressing in B2. But IMO his biggest issue is the visual of the vent holes. The side panel is the first thing you look at when the case is on the desk and if it's not catching your eyes then that's that. And now the price tag comes in again as that set the initial expectation so high that when the case is not perfect the letdown is real.</li>
</ul>hopefully you can keep improving the case with later batches and revisions. W1 is on the right track, just need to keep moving forward</blockquote>

[QUOTE="thelaughingman, post: 249699, member: 8234"] this is just my inference of his comments in the video, also factor in previous videos and builds - he can't be bothered to do a full custom loop because W1 does not make his shortlist of potential housing for his permanent build [LIST] [*]M1 and T1 were housing his main build for certain time period - multiple videos, multiple loops with different components and upgrades [*]Meshlicious was a main build candidate - couple of videos and 1 bad ass hardline loop [*]C4 is going to get loop only because it's so similar to the M1 that I think that he thinks it can be a replacement/sidegrade, plus the temps in his testing were not really satisfactory so he wants to try dual 280-rad. [*]W1 not even in the list due to various reasons listed out in the video - majority of which you're addressing in B2. But IMO his biggest issue is the visual of the vent holes. The side panel is the first thing you look at when the case is on the desk and if it's not catching your eyes then that's that. And now the price tag comes in again as that set the initial expectation so high that when the case is not perfect the letdown is real. [/LIST] hopefully you can keep improving the case with later batches and revisions. W1 is on the right track, just need to keep moving forward [/QUOTE]

Verification