Normal
[USER=17843]@Max Fischer[/USER] Thanks so much for your initial support. Things are just so slow right now especially for small companies.-power switch: I've had no problems with the 80g switch, I would expect the 100g to be better though just in the case of redundancy, I'll look into it.-Cables: cable management you can expect to have a similar experience to dual chamber cases like the louqe ghost, however slightly cleaner since I've designed the routing for all the Mobo cables to go behind the psu. For the Mobo io connectors they route out the back very similar to the new vertical case from NZXT. I'm actually excited they released that case because it validated my design very well. The difference is that I plan to have interchangable port plates for the front and back so people could have options for their needs. Right now the original rear plate that a DP, 2 usb, and Pwr. They connector to he Mobo via expensions. Makes a super clean result.-Funding: This is something I'm am reworking a bit. My initial goal is to crowdfund. There are a couple other options including preordering and making them in batches (slower but gets more outreach sooner).Hope this helps! Thank you guys for your patience!
[USER=17843]@Max Fischer[/USER] Thanks so much for your initial support. Things are just so slow right now especially for small companies.
-power switch: I've had no problems with the 80g switch, I would expect the 100g to be better though just in the case of redundancy, I'll look into it.
-Cables: cable management you can expect to have a similar experience to dual chamber cases like the louqe ghost, however slightly cleaner since I've designed the routing for all the Mobo cables to go behind the psu. For the Mobo io connectors they route out the back very similar to the new vertical case from NZXT. I'm actually excited they released that case because it validated my design very well. The difference is that I plan to have interchangable port plates for the front and back so people could have options for their needs. Right now the original rear plate that a DP, 2 usb, and Pwr. They connector to he Mobo via expensions. Makes a super clean result.
-Funding: This is something I'm am reworking a bit. My initial goal is to crowdfund. There are a couple other options including preordering and making them in batches (slower but gets more outreach sooner).
Hope this helps! Thank you guys for your patience!
