Normal
That you are working on the Sentry 3.0 is good news. I love my Sentry 2.0 case, unfortunately it is in a thermally unfavorable location (TV sideboard) in horizontal orientation.Due to insufficient air circulation in the sideboard, the heat accumulates, so sooner or later all components are throttling. My plan was then to use an external water cooling circuit for the CPU and GPU.An ambitious idea, which unfortunately failed due to the too small GPU bay, because the connectors of GPU water blocks extend beyond the specifications mentioned in the manual "possible oversize area".Hence my wishes:- Make the GPU area bigger, so that it can fit water blocks (wider and a bit higher).- PCI-E 4.0 riser- An optional cover to elegantly lead watercooling hoses out of the back of the case (Okay, that's very special but one can still dream)
That you are working on the Sentry 3.0 is good news. I love my Sentry 2.0 case, unfortunately it is in a thermally unfavorable location (TV sideboard) in horizontal orientation.
Due to insufficient air circulation in the sideboard, the heat accumulates, so sooner or later all components are throttling. My plan was then to use an external water cooling circuit for the CPU and GPU.
An ambitious idea, which unfortunately failed due to the too small GPU bay, because the connectors of GPU water blocks extend beyond the specifications mentioned in the manual "possible oversize area".
Hence my wishes:
- Make the GPU area bigger, so that it can fit water blocks (wider and a bit higher).
- PCI-E 4.0 riser
- An optional cover to elegantly lead watercooling hoses out of the back of the case (Okay, that's very special but one can still dream)
