Normal
1. Not currently. The addition of 60/70 x 25mm fan support meant I had to increase the height of the case (when vertical) by 10mm. The panel mounting points would be very similar to the S401 on the vented side, but on the solid side, the panel mounts have moved for clearance. I was hoping to keep the overall dimensions the same for the purpose of customers reusing their custom panels but I don't think this is possible while still supporting the thicker fans. Even with the fan support removed, the PSU inlet clearance has changed for the 3-slot height and thus had to be relocated so it is not just the new fan support that breaks backwards panel compatibility.2. I'm trying to include this support, yes. The problem I'm facing now is that the PSU requires a new, larger bracket be made so that I can add an additional 2.5" drive mount underneath it. There is one 3.5" mount right now underneath the GPU, but that would require a single-slot GPU for clearance. I'm still massaging the design so I'll update here when I get to the next plateau of completion.
1. Not currently. The addition of 60/70 x 25mm fan support meant I had to increase the height of the case (when vertical) by 10mm. The panel mounting points would be very similar to the S401 on the vented side, but on the solid side, the panel mounts have moved for clearance. I was hoping to keep the overall dimensions the same for the purpose of customers reusing their custom panels but I don't think this is possible while still supporting the thicker fans. Even with the fan support removed, the PSU inlet clearance has changed for the 3-slot height and thus had to be relocated so it is not just the new fan support that breaks backwards panel compatibility.
2. I'm trying to include this support, yes. The problem I'm facing now is that the PSU requires a new, larger bracket be made so that I can add an additional 2.5" drive mount underneath it. There is one 3.5" mount right now underneath the GPU, but that would require a single-slot GPU for clearance. I'm still massaging the design so I'll update here when I get to the next plateau of completion.
