Normal
Update to the design here. Removed the bottom side, but kept the square bracket supporting the integrated standoffs. This works much better than the diagonal "tabs" from last time. The bottom is again supported by an acrylic sheet, but with pegs pushing through holes in the bottom to tighten the connection.The rear mounting tab has also been made shorter, while the total height of the case is increased by 3mm for a total height of 67mm in order to support the newer AMD Wraith Stealth coolers (after removing the logo fan shroud).Top and bottom panels would be cut separately from the front, back and sides, so that anyone can customize the top and bottom differently from the main colors. I want to support clear acrylic tops in addition to solid colors.
Update to the design here. Removed the bottom side, but kept the square bracket supporting the integrated standoffs. This works much better than the diagonal "tabs" from last time. The bottom is again supported by an acrylic sheet, but with pegs pushing through holes in the bottom to tighten the connection.
The rear mounting tab has also been made shorter, while the total height of the case is increased by 3mm for a total height of 67mm in order to support the newer AMD Wraith Stealth coolers (after removing the logo fan shroud).
Top and bottom panels would be cut separately from the front, back and sides, so that anyone can customize the top and bottom differently from the main colors. I want to support clear acrylic tops in addition to solid colors.
