I'm not sure about the quality of their newer models, but the quality control on their S1 case was really bad. Worst $270 (or whatever it was at the time) I ever spent. Luckily I dumped it on eBay for a small profit, but that case was a huge let down. They did a pretty good job of misleading people with the units they used for photos, as the quality seemed really good, but it was far from reality when the cases actually landed.
I remember being in the group chat and sharing my photos and some people saying they had similar issues, while others claim their case is perfect. Then you would ask them to upload some photos of their perfect case and you would see a lot of the same flaws in their case, they just don't care as much, or they just didn't have the eye for small detail.
Mine had a side panel that would scrape the rails because it was tighter on one side than the other, and I would get small metal shaving from the grinding. My top mesh panel was warped, I had two different tones of silver on my front panel, the metal bends were hugely inconsistent, the gaps on the panels were all crooked, there were small white scrapes on the edges of panels, the threaded screw holes didn't all line up so you would get screws that didn't sit flush and would go in crooked/strip the holes, etc. Here are some photos:
[MEDIA=imgur]3YXqxC2[/MEDIA]
[MEDIA=imgur]Vm8z2FX[/MEDIA]
[MEDIA=imgur]fo6Q9c0[/MEDIA]
[MEDIA=imgur]ZR4dw5q[/MEDIA]
[MEDIA=imgur]vE2kbv9[/MEDIA]
[MEDIA=imgur]FYEShL1[/MEDIA]
I'm really hoping the MJOLNIR lives up to all the hype about their quality control and tolerances because the QC on the Ghost was embarrassing. I'll never buy another case from them.
