Normal
Got hands on with the MSI Suprim X 3080 (326mm long) just now, so the MSI Gaming X Trio 30XX (323mm long), should not be a problem.The Top Panel will close *without bulging out. I had to use the *lowest install position for GPU. This leaves 33mm of space for HDMI / DP Cables. and that is not enough for straight cables, so we have 2 solutions coming:1) we will provide 3D Print Ready tall feet design on the website very soon, these feet will lift the case higher off the ground to make room for *regular / straight HDMI / DP Cables.2) buy angled cables yourself or from our website.If used with a GPU less than 320mm long, you can mount the GPU at the *second lowest position, and not have to worry about the above - just use low profile cables that are widely available.
Got hands on with the MSI Suprim X 3080 (326mm long) just now, so the MSI Gaming X Trio 30XX (323mm long), should not be a problem.
The Top Panel will close *without bulging out. I had to use the *lowest install position for GPU. This leaves 33mm of space for HDMI / DP Cables. and that is not enough for straight cables, so we have 2 solutions coming:
1) we will provide 3D Print Ready tall feet design on the website very soon, these feet will lift the case higher off the ground to make room for *regular / straight HDMI / DP Cables.
2) buy angled cables yourself or from our website.
If used with a GPU less than 320mm long, you can mount the GPU at the *second lowest position, and not have to worry about the above - just use low profile cables that are widely available.
