REVIEWED: GeForce RTX 5060 Ti with ZOTAC GAMING RTX 5060 TI Twin Edge OC

Reply to thread

Message

[USER=135]@Boil[/USER] Looking at the ATX/SFX PSU renders (photos?) here, I don't see how the C8I would have issues fitting with an SFX PSU. There's clearly plenty of clearance below the PCIe slot side of the ITX motherboard mount. It'll obviously mess with the riser length in some way, but it would probably be doable. Of course you'll have some serious issues fitting the m.2 riser card given its ~80mm height and the 72mm max CPU cooler clearance, but I guess you could hot-rod it and cut a small window in the mesh? After all, the FAQ doesn't say DTX is incompatible, just that "Meshlicious does not support Mini-DTX motherboard, and it’s not recommended". Which to me sounds like a pretty standard "at your own risk" statement.

[QUOTE="Valantar, post: 233568, member: 5738"] [USER=135]@Boil[/USER] Looking at the ATX/SFX PSU renders (photos?) [URL='https://ssupd.com/products/meshlicious']here[/URL], I don't see how the C8I would have issues fitting with an SFX PSU. There's clearly plenty of clearance below the PCIe slot side of the ITX motherboard mount. It'll obviously mess with the riser length in some way, but it would probably be doable. Of course you'll have some serious issues fitting the m.2 riser card given its ~80mm height and the 72mm max CPU cooler clearance, but I guess you could hot-rod it and cut a small window in the mesh? After all, the FAQ doesn't say DTX is [I]incompatible[/I], just that "Meshlicious does not support Mini-DTX motherboard, and it’s not recommended". Which to me sounds like a pretty standard "at your own risk" statement. [/QUOTE]

Verification