REVIEWED: GeForce RTX 5060 Ti with ZOTAC GAMING RTX 5060 TI Twin Edge OC

Reply to thread

Message

Hello all! I actually emailed K888D a couple of pictures of my custom watercooling loop involving an Alphacool NexXxoS ST25 240mm Slim Rad & Barrow DDC Pump/Reservoir/ARGB combo CPU Waterblock. It was a tight fit but had good clearance once I had everything installed inside my LZ7 XTD case. I'm just doing a simple loop for my Ryzen 3950X (PBO Enabled) which I had originally in an SGPC K39 case (in Eco Mode). Please note that I had to use an Enhance ENP-7660b 600W Flex ATX PSU. Temps are 30°C at idle & 60°C after 30 minutes running Cinebench R20. I have the pump running @ 1800rpm. Maximum is 4600rpm.

<blockquote data-quote="gpaint45" data-source="post: 235052" data-attributes="member: 17432">Hello all!&nbsp; I actually emailed K888D a couple of pictures of my custom watercooling loop involving an Alphacool NexXxoS ST25 240mm Slim Rad &amp; Barrow DDC Pump/Reservoir/ARGB combo CPU Waterblock. It was a tight fit but had good clearance once I had everything installed inside my LZ7 XTD case. I'm just doing a simple loop for my Ryzen 3950X (PBO Enabled) which I had originally in an SGPC K39 case (in Eco Mode). Please note that I had to use an Enhance ENP-7660b 600W Flex ATX PSU. Temps are 30°C at idle &amp; 60°C after 30 minutes running Cinebench R20.&nbsp; I have the pump running @ 1800rpm.&nbsp; Maximum is 4600rpm.<img src="https://i.imgur.com/rqrPi8a.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="https://i.imgur.com/ijrm7Br.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

[QUOTE="gpaint45, post: 235052, member: 17432"] Hello all! I actually emailed K888D a couple of pictures of my custom watercooling loop involving an Alphacool NexXxoS ST25 240mm Slim Rad & Barrow DDC Pump/Reservoir/ARGB combo CPU Waterblock. It was a tight fit but had good clearance once I had everything installed inside my LZ7 XTD case. I'm just doing a simple loop for my Ryzen 3950X (PBO Enabled) which I had originally in an SGPC K39 case (in Eco Mode). Please note that I had to use an Enhance ENP-7660b 600W Flex ATX PSU. Temps are 30[B]°[/B]C at idle & 60[B][B]°[/B][/B]C after 30 minutes running Cinebench R20. I have the pump running @ 1800rpm. Maximum is 4600rpm. [IMG]https://i.imgur.com/rqrPi8a.jpg[/IMG] [IMG]https://i.imgur.com/ijrm7Br.jpg[/IMG] [/QUOTE]

Verification