Normal
In conclusion (posting this for people looking to do something similar), a DC-LT 2 in a DC-LT 40 is sufficient for pumping through a TX240 + TX120 + GPU block + CPU block + reservoir + 2 QDCs.Screenshot taken while AIDA64 had been running stress test for an hour:TLDR: CPU capping at around 90C at the hottest spot, GPU capping at 52C (not pictured in screenshot), and coolant capping out at 41C. I have a slight PBO2 undervolt set on the 5900X (left thermal and voltage limits on Auto, but did a negative offset on all cores of 15) with an additional 100Mhz boost, and a slight undervolt on the GPU- 2000 Mhz at 1015mV on the RTX 3080FE. I'm pretty sure undervolting can be done far more aggressively on both CPU and GPU, and chipset temps can be improved by replacing the stock thermal pad.We'll see how this goes when I get my T1, but I expect it to be viable with regards to the pump, especially since the tubing runs will shorten dramatically, it won't have the reservoir attached, and it'll go from 2 QDCs to 1 when the res is disconnected.
In conclusion (posting this for people looking to do something similar), a DC-LT 2 in a DC-LT 40 is sufficient for pumping through a TX240 + TX120 + GPU block + CPU block + reservoir + 2 QDCs.
Screenshot taken while AIDA64 had been running stress test for an hour:
TLDR: CPU capping at around 90C at the hottest spot, GPU capping at 52C (not pictured in screenshot), and coolant capping out at 41C. I have a slight PBO2 undervolt set on the 5900X (left thermal and voltage limits on Auto, but did a negative offset on all cores of 15) with an additional 100Mhz boost, and a slight undervolt on the GPU- 2000 Mhz at 1015mV on the RTX 3080FE. I'm pretty sure undervolting can be done far more aggressively on both CPU and GPU, and chipset temps can be improved by replacing the stock thermal pad.
We'll see how this goes when I get my T1, but I expect it to be viable with regards to the pump, especially since the tubing runs will shorten dramatically, it won't have the reservoir attached, and it'll go from 2 QDCs to 1 when the res is disconnected.
