Normal
[USER=13352]@DrHudacris[/USER] [USER=23433]@JDuval[/USER] [USER=23663]@RySean[/USER] [USER=16153]@cennis[/USER]In 1.5 GPU slot mode, you have to use a 180 degree U shape fitting, or manifold, or flow meter to run the GPU block water tubes stacked on top of each other.To that end, there is 40mm of space above the GPU block for this installation. It will require careful fitting planning.On another note. As I suspected, DDC pump + *low profile heatsink (must be low profile) could work in this setup.
[USER=13352]@DrHudacris[/USER] [USER=23433]@JDuval[/USER] [USER=23663]@RySean[/USER] [USER=16153]@cennis[/USER]
In 1.5 GPU slot mode, you have to use a 180 degree U shape fitting, or manifold, or flow meter to run the GPU block water tubes stacked on top of each other.
To that end, there is 40mm of space above the GPU block for this installation. It will require careful fitting planning.
On another note. As I suspected, DDC pump + *low profile heatsink (must be low profile) could work in this setup.
