Reply to thread

Message

Some additional details on the images above:

Fans
I had some extra 40mm fans and an unused fan header on the board, and realized there was 0 airflow on the motherboard side of the case, so I added them at the top in exhaust to help get some air in there.
I removed the side panels on the HDPLEX and put a 30mm fan on either side in push-pull configuration, hopefully to pull air from the back of the case and over the aluminum housing to keep it cool (can see one of the fans in the photo of the rear).
All the fans in the radiator block (2x 120mm and 2x 92mm) are driven by a single fan splitter, which runs from the mobo all the way to the front of the case
Cables/Power
I'm glad I watched some videos online and added a recommended 1" to all my cable measurements before trimming, because the DC-IN for the HDPLEX barely reaches.

<blockquote data-quote="nascentparadigm" data-source="post: 288483" data-attributes="member: 10513">Some additional details on the images above:Fans<ul>
<li data-xf-list-type="ul">I had some extra 40mm fans and an unused fan header on the board, and realized there was 0 airflow on the motherboard side of the case, so I added them at the top in exhaust to help get some air in there.</li>
<li data-xf-list-type="ul">I removed the side panels on the HDPLEX and put a 30mm fan on either side in push-pull configuration, hopefully to pull air from the back of the case and over the aluminum housing to keep it cool (can see one of the fans in the photo of the rear).</li>
<li data-xf-list-type="ul">All the fans in the radiator block (2x 120mm and 2x 92mm) are driven by a single fan splitter, which runs from the mobo all the way to the front of the case</li>
</ul>Cables/Power<ul>
<li data-xf-list-type="ul">I'm glad I watched some videos online and added a recommended 1&quot; to all my cable measurements before trimming, because the DC-IN for the HDPLEX barely reaches.</li>
</ul></blockquote>

[QUOTE="nascentparadigm, post: 288483, member: 10513"] Some additional details on the images above: [B]Fans[/B] [LIST] [*]I had some extra 40mm fans and an unused fan header on the board, and realized there was 0 airflow on the motherboard side of the case, so I added them at the top in exhaust to help get some air in there. [*]I removed the side panels on the HDPLEX and put a 30mm fan on either side in push-pull configuration, hopefully to pull air from the back of the case and over the aluminum housing to keep it cool (can see one of the fans in the photo of the rear). [*]All the fans in the radiator block (2x 120mm and 2x 92mm) are driven by a single fan splitter, which runs from the mobo all the way to the front of the case [/LIST] [B]Cables/Power[/B] [LIST] [*]I'm glad I watched some videos online and added a recommended 1" to all my cable measurements before trimming, because the DC-IN for the HDPLEX [I]barely [/I]reaches. [/LIST] [/QUOTE]

Verification