REVIEWED: GeForce RTX 5060 Ti with ZOTAC GAMING RTX 5060 TI Twin Edge OC

Reply to thread

Message

1. I think it will depend on the rotation. I honestly don't see how it wouldn't work with vertical barbs (it may be close), however I can definitely see it being problem if mounted horizontally. Also, the heatspreaders can be gently pushed up against for some additional space if needed.
x299 ITX board - Apogee Drive Vertical Orientation
[SPOILER="Concepts that are not measured"]
[/SPOILER]

2. With low profile fans on the side and a thin rad, you could probably mount a pump on the back
Example - Example 2

There are some pretty extreme low-profile pump options so I think the only limit here (outside of Thermals) would be creativity.
http://cdn.overclock.net/5/59/5985e699_2012-05-14_18-18-28_736.jpeg

Also, if 2x240mm is too difficult to manage, a 1x120 + 2x240mm is possible as well... with plenty of room to spare.
https://cdn.pcpartpicker.com/static/forever/images/userbuild/189427.e211b39cfa458d27da22dacac73e84fe.1600.jpg

I'm not a fan of external pumps/reservoirs myself but it can work and still look decent doing it (for all you external power brick loving heathens).
https://0x7d.com/category/misc/

<blockquote data-quote="3lfk1ng" data-source="post: 52730" data-attributes="member: 473">1. I think it will depend on the rotation. I honestly don't see how it wouldn't work with vertical barbs (it may be close), however I can definitely see it being problem if mounted horizontally. Also, the heatspreaders can be gently pushed up against for some additional space if needed.<a href="https://smallformfactor.net/wp-content/uploads/ASRock-X99E-ITX-ac-pictured-11-810x486.jpg">x299 ITX board</a> - <a href="https://cdn.pcpartpicker.com/static/forever/images/userbuild/143066.e799ca30196414b278795b132729de55.0b597d8d8fea1d0c7e5e3b76fdff96c5.1600.jpg">Apogee Drive Vertical Orientation</a>[SPOILER=&quot;Concepts that are not measured&quot;]<img src="http://i.imgur.com/0qJO5EC.png" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i.imgur.com/sFdUL1Z.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />&nbsp; [/SPOILER]2. With low profile fans on the side and a thin rad, you could probably mount a pump on the back<a href="https://i.imgur.com/GjLSLQk.jpg">Example</a> - <a href="https://i.imgur.com/xWmUyp7.jpg">Example 2</a>There are some pretty extreme low-profile pump options so I think the only limit here (outside of Thermals) would be creativity.<a href="http://cdn.overclock.net/5/59/5985e699_2012-05-14_18-18-28_736.jpeg">http://cdn.overclock.net/5/59/5985e699_2012-05-14_18-18-28_736.jpeg</a>Also, if 2x240mm is too difficult to manage, a 1x120 + 2x240mm is possible as well... with plenty of room to spare.<a href="https://cdn.pcpartpicker.com/static/forever/images/userbuild/189427.e211b39cfa458d27da22dacac73e84fe.1600.jpg">https://cdn.pcpartpicker.com/static/forever/images/userbuild/189427.e211b39cfa458d27da22dacac73e84fe.1600.jpg</a>I'm not a fan of external pumps/reservoirs myself but it can work and still look decent doing it (for all you external power brick loving heathens).<a href="https://0x7d.com/category/misc/">https://0x7d.com/category/misc/</a></blockquote>

[QUOTE="3lfk1ng, post: 52730, member: 473"] 1. I think it will depend on the rotation. I honestly don't see how it wouldn't work with vertical barbs (it may be close), however I can definitely see it being problem if mounted horizontally. Also, the heatspreaders can be gently pushed up against for some additional space if needed. [URL='https://smallformfactor.net/wp-content/uploads/ASRock-X99E-ITX-ac-pictured-11-810x486.jpg']x299 ITX board[/URL] - [URL='https://cdn.pcpartpicker.com/static/forever/images/userbuild/143066.e799ca30196414b278795b132729de55.0b597d8d8fea1d0c7e5e3b76fdff96c5.1600.jpg']Apogee Drive Vertical Orientation[/URL] [SPOILER="Concepts that are not measured"] [IMG]http://i.imgur.com/0qJO5EC.png[/IMG][IMG]http://i.imgur.com/sFdUL1Z.jpg[/IMG] [/SPOILER] 2. With low profile fans on the side and a thin rad, you could probably mount a pump on the back [URL='https://i.imgur.com/GjLSLQk.jpg']Example[/URL] - [URL='https://i.imgur.com/xWmUyp7.jpg']Example 2[/URL] There are some pretty extreme low-profile pump options so I think the only limit here (outside of Thermals) would be creativity. [URL]http://cdn.overclock.net/5/59/5985e699_2012-05-14_18-18-28_736.jpeg[/URL] Also, if 2x240mm is too difficult to manage, a 1x120 + 2x240mm is possible as well... with plenty of room to spare. [URL]https://cdn.pcpartpicker.com/static/forever/images/userbuild/189427.e211b39cfa458d27da22dacac73e84fe.1600.jpg[/URL] I'm not a fan of external pumps/reservoirs myself but it can work and still look decent doing it (for all you external power brick loving heathens). [URL]https://0x7d.com/category/misc/[/URL] [/QUOTE]

Verification