REVIEWED: GeForce RTX 5060 Ti with ZOTAC GAMING RTX 5060 TI Twin Edge OC

Reply to thread

Message

One experiment. I put the power supply on edge, and got a SL2 3.7L case. Now you can install more powerful processors and cool them with coolers up to 70mm!
Size: 228 x 183 x 88mm
Chassis supports 170 x 170mm mini-ITX motherboards
Use coolers to cool the CPU, no more than 70mm high.
Two 2.5" drives can be installed in a special basket
*with the installed basket, coolers with a height of no more than 45mm are compatible.
You can also install one 2.5" drive without a cage.
*maximum cooler height with this installation is no more than 60mm
The chassis is compatible with flex power supplies 1U
Page on the site

[MEDIA=imgur]a/8aYnKKF[/MEDIA]

<blockquote data-quote="sergiiua" data-source="post: 268745" data-attributes="member: 1175">One experiment. I put the power supply on edge, and got a SL2 3.7L case. Now you can install more powerful processors and cool them with coolers up to 70mm!<ul>
<li data-xf-list-type="ul">Size: 228 x 183 x 88mm</li>
<li data-xf-list-type="ul">Chassis supports 170 x 170mm mini-ITX motherboards</li>
<li data-xf-list-type="ul">Use coolers to cool the CPU, no more than 70mm high.</li>
<li data-xf-list-type="ul">Two 2.5&quot; drives can be installed in a special basket 
*with the installed basket, coolers with a height of no more than 45mm are compatible.</li>
<li data-xf-list-type="ul">You can also install one 2.5&quot; drive without a cage. 
*maximum cooler height with this installation is no more than 60mm</li>
<li data-xf-list-type="ul">The chassis is compatible with flex power supplies 1U </li>
</ul><a href="https://www.custom-mod.com/en/sl2-2?currency=USD">Page on the site</a>[MEDIA=imgur]a/8aYnKKF[/MEDIA]</blockquote>

[QUOTE="sergiiua, post: 268745, member: 1175"] One experiment. I put the power supply on edge, and got a SL2 3.7L case. Now you can install more powerful processors and cool them with coolers up to 70mm! [LIST] [*]Size: 228 x 183 x 88mm [*]Chassis supports 170 x 170mm mini-ITX motherboards [*]Use coolers to cool the CPU, no more than 70mm high. [*]Two 2.5" drives can be installed in a special basket *with the installed basket, coolers with a height of no more than 45mm are compatible. [*]You can also install one 2.5" drive without a cage. *maximum cooler height with this installation is no more than 60mm [*]The chassis is compatible with flex power supplies 1U [/LIST] [URL='https://www.custom-mod.com/en/sl2-2?currency=USD']Page on the site[/URL] [MEDIA=imgur]a/8aYnKKF[/MEDIA] [/QUOTE]

Verification