Recent content by zugok

I swapped my 2700X for a 3900X. I using the scythe fuma I can get stable OC to ~4.2 GHz and leave the fans on "normal" speed. For silent settings I can leave the OC a 4.0Ghz

Your water cooling solution is great. I think I might try something similar in the future. Can you provide a parts breakdown for the CPU cooler you have setup? Cheers John H

I had read that the 3950X runs cooler than the 3900X, need less watts. At least a stock? Maybe I am wrong?

Hey sn0man, thanks for the feedback. My process for 3D printed parts is Usually start with a quick doodle, some measurements for clearances via calipers & rulers. Build the 3D mesh in Modo with the Dimensions Tool active. Export and 3D print. Sometimes do minor adjustments and reprint...

Finally got my Cerberus X build mostly complete.Very slow build as I was waiting for various parts. This is a replacement for my "olde-suped-up" Dell Optiplex 990 MT (i7-2600) Parts in the build: Cerberus X Case Asrock x570 Taichi Scythe Fuma Rev. B CPU cooler. Ryzen 3900X PNY Geforce RTX...

Thanks for the suggestion. I saw that mod, don't remember if the PSU fan draws air from the inside, all the pics are gone? Although I did not fully test it, the CPU power cable might not be long enough to reach the plug on the MB? Anyway, I am comfortable with it for now. Perhaps when I...

Hey Marc. I did consider relocating the PSU, but it is more work than I feel I need to do at this time, and it would interfere w the MB. Cheers and great work on your builds as they have been helpful for me. JH

Hey Marc, thank you for your response and feedback. The front duct fits onto the front fan with 2-3mm clearance from the adjacent parts, video card etc. It also serves to hold the PSU cables out of the way. I did consider the Noctua C14S, but went with the Fuma because I hoped to have a more...

Here are a few pics of the case w the dual fans installed in the front below the PSU, as well as how I managed cables.

Finally got my Cerberus X build mostly complete.Very slow build as I was waiting for various parts. This is a replacement for my "suped-up" Dell Optiplex 990 MT Parts in the build: Cerberus X Case Asrock x570 Taichi Scythe Fuma Rev. B CPU cooler. Ryzen 2700X (cheapo $130 placeholder until...

Does any one know what he name of the metal part "push-pins" that are used to secure the steel sides to the frame of the Cerberus? Was thinking hood pin but they are much shorter?

I found this FAQ on the SenseWire at pslatecustoms.com. Maybe they can help? What are the sense wires? Alternatively does anyone know of complete tools/kit or online guide that a person could use to modify the length of the included cables themselves? Cheers and happy new year.

Thankyou Marc!

I am looking for recommendations for the order in which to install the various PC components into a Sliger Cerberus X or SFF case? I have a Cerberus X. Off the top of my head I am thinking: #1 Fans (Corsair ML120 front/top panel, ML140 x2 bottom, Noctua NF-B9 back panel) #2 SFX PSU (Corsair...

As suggested by another member here, Sliger has a cable part for their SM580 case that may work? https://www.sliger.com/includes/products/sm/RX-FRONTPANEL-AMD.jpg I just got my Cerberus X case today, so I hope to have time over the holidays, to build the system and try out modding as I have...