Recent content by yj668

Is the planned product made by Lian Li or a different factory?

I think going to production at least with at least some batches of C4 13.37L’s will be a good idea. It’s a fully tested case with tooling all ready at Lian Li. Leave the 14.7L for a V2 refresh when all the high TDP cards are out for a full assessment on compatibility. 😊

@dondan I was wondering what is the approximate clearance width in this area? (back of PSU to the side panel) Snapshot from Ali's video

I can confirm this pinout is correct for SF750 Plat. The fan spins for a moment on PSU power up as expected, even with the A9x14. I have 2 early 2019 (unaffected by recall) and a late 2020 SF750, they all work perfectly fine with your pinout. Thanks for sharing.

Upgraded fans to Chromax version. These have a wider RPM range and are better suited for silent PCs. These RTX 3000 FE do have good airflow recirculation prevention compared to the 2000 FE that was also pushing air hard into the 645LT.

Hi Daniel what is the approximate clearance for this portion of the case if the PSU is a SF600/750 Platinum? Screen grab from Ali's preview video

I've just requested from ASRock TSD for a custom BIOS based on the latest build for ASRock Z390 Phantom Gaming-ITX/ac. Just a courteosy share for ASRock PGIX Z390 users before the file linked expires. 4.42A Based on P4.40? AC / DC Loadline Unlocked (For use with offset/adaptive vcore by...

Does anyone happen to own both the EK-XTOP DDC and VTX pump and is able to share the combined dimensions of these? Thanks in advance! 😁

@Wahaha360 the edit permissions are ready only.

I'll run for the Singapore slot. Or as a backup for USA - SoCal, I'll be there in a month or 2 when I'm with my girlfriend for several months. 1. Been just a lurker on Smallformfactor.net mostly. This is my first post on the T1 thread. 2. I've built 2 Dan A4 (V4.0 and V4.1) for my girlfriend...

Second A4 SFX build, first for my girlfriend. Moved my ITX custom loop into A4 SFX. Absolutely love this case. ☺ Improved cable routing vs the first rig in regard to AIO airflow. 24 pin motherboard to 30 pin (PSU side) was routed via small gap between MB and PSU from front chamber to back...

Custom BIOS P4.20A for Z390 Phantom Gaming-ITX/ac requested from ASRock TSD with IA AC DC Loadline exposed. Use at your own risk :) https://www66.zippyshare.com/d/QtrGwe5g/17597/Z390%20Phantom%20Gaming-ITX_ac%28P4.20A%29.zip

I've had 4 vibration compensators installed, 2 tugged between the heat spreader of Klevv Bolt X LP RAMs. The pan head end of the dampener sits against the side panel of the case and when the motherboard sits vertically the A9x14 leans against the side panel naturally, no screws or adhesives were...

Build done up in late may thought I'd like to share this DAN A4 V4 build. i7-9700K lapped IHS & die ASRock Z390 Phantom Gaming-ITX/ac KLEVV Bolt X 3200MHz 16GB @ 3900MHz C18 2H Stressapptest EVGA RTX 2070 Blower Samsung 970 EVO Plus 500GB Crucial P1 1000GB Corsair SF750W Platinum Asetek 645LT...