Recent content by UdoG

No, it's not necessary to drill some holes. The four mounting holes from the ULTITOP D5 fits - and the D5 Next is mounted directly to the ULTITOP. I will post some additional pics as soon as my reservior was delivered.

OK, the AquaComputer D5 Next with a ULTITOP D5 fits. Now I'm waiting for my res. If you install a standard D5 pump with the ULTITOP D5 you will get some space more (around 1-1.5cm). Advantage of the D5 Next - you can connect your fans directly, have the water temperature and a virtual flow...

With no reservoir - how do I know if enough water is in the loop - e.g. after 3-5 month?

Here are two pics: Please notice that the fill-plug is not installed.

Is there any way to fit a D5 pump with top and a separate reservoir? The XSPC Tank Reservoir - Laing D5 / MCP655 w/ Blue LED Light - Acrylic will fit, but only with a GPU which is no linger than around 27cm (e.g. RTX 2080 TI with standard layout). Actually I have installed a Gigabyte RTX 2080...

Thanks! So I'm waiting for the feedback from @DrHudacris ?

The biggest problem is, that the Swiftech Apogee Drive 2 is no longer available .

@Bigtruckboom Which pump/res did you installed now?

So the Apogee is still to high with Koolance low profile 90 degree adapters - it doesn't matter if you turn the G1/4?

I thought that the Swiftech Apogee Drive 2 with DDC is very noisy? Maybe the Swiftech will not fit, because height = 61,5mm I'm waiting for the XSPC Tank Reservoir - Laing D5 (not V3 - the old version). Usually it should fit on the bottom of the case - and you can use a D5. Dimensions: 121.5...

Hi @Sugaroverdose Thanks for sharing your build. Could you please post some photos from inside - to see the tubing and where the pump/res is placed? Is the GPU and CPU in your loop? Could you please post your config too? Maybe the Noctua NA-SFMA1 will fit too - together with the Noctua...

Hi @KSliger Thanks for your feedback. That's what I call support :-) I just sent a mail to you.

@KSliger I have some trouble with the SV590 case - especially with the paintwork: the paintwork is bad on several sides (always in the lower area. I already sent a mail last week to the Sliger support - since today no feedback. So I sent a second mail today... Maybe you can assist me? The case...

Another question - do I have an issue when I use a WLAN adapter (2,4GHz) for my keyboard and gamepad? Maybe the case will disturb the connection/quality of the signal?

Why you didn't install the fan/rad as intake? You will have more space for cables (top) and maybe better temps. Is it due to dust? https://ibb.co/xShSHJN https://ibb.co/7W7cTQr https://ibb.co/swzWrRt https://ibb.co/rQXjvCD