Recent content by Thestarkiller32

ID COOLING IS-50 ID COOLING IS-VC45 PH-TC90LS

By us in Germany, that mainboard sould arrive on the 18th of May.

https://www.lidl.de/de/parkside-akku-feinbohrschleifer-pfbs-12-a1/p264310?gclid=CjwKCAjw8r_XBRBkEiwAjWGLlPGAMZZu3mUAIhdBZihEG09Yx1P104qnIiSlKnL39dgPaUJ-t4EWKhoCHKYQAvD_BwE In my Contry, thats an Option that you could considure :)

At that sice... woudent it be better and cheaper just using a SFX unit? ... i mean its 23cm long 13cm wide and 4cm thic.

I found it real nice ;)

In the past, i had preordert the M1 V5 and got dissapointet befor it even shipped... first they had to change the black USB 3.0 Ports to regular Blues and then had to delay the shipment...but ok it came the me to Germany without any problims. As i unboxed the case, i saw that it was the blank...

The ATLAS Cooler had worked as the rear exhaust plus the PSU... Normaly witj the bottom mesh removed it should perform great and BTW. The Raven Ridge APUs use Tim and are not Soldert so the temperature is naturaly higher. You could try mounting a Slim 120mm Fan on the outside between the feed.

...not everyone can afford a 2 TB SSD vor 600$

I would suggest that you buy something suitable in your country instead of shipping it from the darkest corner of Asia.

It's a 14mm Fan frame, normally the Screws are available in 5mm steps... so either they are to long ore a bit to short.

There are 2 types of Screws: UNC 6-32 M3 Thowes are the most common ones and if they are to long, get a Metalsaw in the hardware store or ask someone.

You could get a EKL Alpenföhn ATLAS with 200W TDP https://www.alpenfoehn.de/en/products/cpu-cooler/atlas

he got only 28mm to work with so only on the side.... but a 25mm fan is realy exotik

Mind that not all 2,5" Drives are the same size! The Seagates are 7mm thicc and the WD ones mostly 9,5mm.

Thouws wound cut it sadly :/