Recent content by T_Tank

I eyeballed a LRS-300 in cad an there wasn't much space but with the load of the hardware currently in it I didn't dare try going under 400 watts of supplied power. I'm not planning on keeping this rgeek 450 watt in heavy use but I least know the g-unit runs it without a complaint (besides...

Yeah I plan on doing finish work on this when I start reprinting components in abs so I can acetone weld an smooth parts together then I'll loose my mind in finishing to get a mix of smooth semigloss and matte sections... and maybe some wood vinyl in certain parts to really whack home the 80's...

version 2 of the front case section printed out with its working internal speakers! need to check some stuff internally to make sure the disk drive isn't being pointed down by cable shenanigans inside so the custom drive bezel pushes back in smoother

Final plan is to print in abs but some parts are keeping to pla since their either the coldest parts of the case or have constant fresh air being blown into them. Hadn't ran into a warping issue yet but this setup but the wall thicknesses on the pla components are 3 inner/outerwalls thick with...

This has been a long going project even before I got my ender 3 pro but once I got a larger printer it had been off to the races The concept The case was inspired by old 80s/early 90s small crt televisions from my childhood and a pinch of Playstation 2 in the front detail bits. Also once I...

Oh the cpu is probably wolfing down more like 100watts cause the old 1045t is locked so it's pure voltage to get it going. Kinda scary it will turbo to 3.8ghz since that is nearly 1ghz over stock. The nano is also a beast when it starts working it can nearly pull 200 watts! This is a old...

Awesome stuff man! Wish you the best of luck! Wonder how well these could handle a old r9 nano and a 1045t oc'd to 3.6ghz XD

Definitely can dig this as a alternative to the other bricks out there. Im probably the minority of people that like this but I'm also using a Enermax steel wing that. If I used it with the stock internal psu would be roasting itself constantly. Crazy how cool it got when I went to the external...

that T12-TG case I really dig I don't know why but it really just clicks with me.

Yeah pretty sure the cerberus is the only one that can comfortably fit all that. I'm using a Enermax steel wing and I can't use my lower pcie slots. Could also look at the more old school style lan boxes of old like the Thermaltake lanbox lite or falcon northwest fragbox 2 case

I can dig it! Totally need more noctua edition stuff!

That is another thing I'd switch out on my own.. Xt90 connector.. But I get folks that make the pico psu love running other than 12v but I see a option to use a old hulking atx psu as a brick for a dc/dc would be nice instead of buying some hard to track and rather costly 19+ volt bricks...

Curious about these but I'd definitely rewire one of these to similar to the gunique so more wires to carry the load and move the offending connectors to the other side to prevent ram interference

Wonder how tricky it would be to add a 8pin to IT safely..

The g-unique still around?