Good question:). If you have noticed, the main case feature is the moveable middle part. The case width is 135mm and this width is divided between the videocard and CPU cooler. I planned the case in such a way that it will be possible to install the largest video card. If you move the middle...
Thank you very much for your interest in my project:). At the moment, the drawings have been transferred to production and I am waiting for my turn to make a prototype. After the prototype is ready, I will begin tests with real hardware. Perhaps it may be some changes in the design. After that...
I posted all the photos on the google drive, because there are problems with viewing.
link to google drive:
https://drive.google.com/drive/folders/1K3SJK4xSVWQ0ciiFOjjN0LqAQOjNxkLs?usp=sharing
Yes of course. I saw this problem in reviews, so at the very beginning of the design for the mid section of the case I made a bend around the perimeter, a shelf of at least 8mm. This should give rigidity when installing components. Below I have uploaded a photo, you can see it. What do you think...
I took some more photos to show the location of all the components. The back wall is completely clean. This is done in order to be able to put the case against the wall. At the bottom of the rear wall of the case there are 2 holes through which all the wires will go out, a photo under the...
Hey guys!
I want to share with you my idea. Maybe here it will be interesting to someone.
A little background.
I started to monitor different startups, starting with N-CASE, then DAN CASES a4-sfx, NFC S4 MINI, DR ZABER CENTRY. These are very cool projects and they are unique each in its own...