Recent content by Senaxx

Sorry didn't check back in for a while. I'm just using the heatsink from the motherboard. No heatsinks from the SSD's are used.

Yeah that's what I meant. The cutout is touching the ssd heatsink at the moment. But not enough for it to interfere with the CPU cooling. It's not perfect and 1 or 2 mm would already clear it. But for now it's fine and the LF3 is bolted down and afaik the SSD heatsink is not pressed down. Do...

I don't have any pictures right now. Since it's a tight fit I'm glad everything is working now and nothing touches the fans or the 4090 fan. When my custom cables arrive I'll make some photos. But what I did is move the PSU to the front, and have the tubes bend run above the power supply. This...

With the included cable you can arrange all the VRM fan, pump and fans separate. I use fancontrol on my pc and set it to an acceptable sound / temperature level. But when it's running at 25% around 2000RPM it's silent, I can't hear a thing. I wish i had done it sooner :)

For the people with a DAN C4-SFX v1.0, Yesterday I have managed to install a Liquid Freezer III 280 (black). It's a tight fit with the tubing's but I've managed to make it work. I've paired it with a 7800x3D and temps have come down a lot (as expected) compared to my air cooler NH-D12L. The new...

I just received my AM5 bracket to test if it fits. Every few degrees helps :)

Funny thing is he's running the D12L the other way around compared to the manual.

Now that I have used the case for over a week, I must say I'm very happy with the case. The only thing that annoys me is the fan of the Cooler Master V850 SFX Gold. The system itself is really silent but that PSU fan is just way too loud. So, I'm planning replacing the fan with a noctua one...

@dondan Thanks for your answer. I saw the manual shows a D12L with dual fans. Stock the D12L only comes with 1 fan. Did you test if there is a noticeable difference with the 2nd fan added? I assume it's easier to pull in fresh air from the back with the 2nd fan added. @mTECHIE Mine has a...

Maybe @dondan can explain which configuration works. I saw an earlier post which recommended the cooler the other way around (phat side on the left side instead of the right as on the picture). But I might just switch to an AIO or full water cooling.

I see you have mounted the NH-D12L the other way that I have. The phat side on the intake side. And noticed you added a second fan?

Maybe to chime in on this. I also have the same board but have no coil whine from the board, absolutely zero. Updated it to latest bios. The only coil whine that I have is my 4090FE on high framerates (200+). But normally I cap my frames to 141 (just under Gsync).

Completed the build yesterday evening and works great. CPU is still a bit to hot to my liking (even with PBO and curve optimizer tuning). So I might switch to an AIO or to full custom water-cooling. All in all the case is very easy to build in, the 4090 FE fits perfectly in his compartment at...

Thanks, I misread then. So it's back to the ASUS ROG Strix B650E-I GAMING WIFI

I saw someone mentioning the Gigabyte B650 in this topic. And the only Gigabyte B650 which fits would be that one. But i couldn't find the dimensions so I'm still checking. Incorrect... not mATX