Recent content by RockenRod

That is interesting as I still can't find this Motherboard anywhere. It is also interesting because the Support site says it does not (does not specify) support for the CPU/GPUs they are selling. This would be an expensive way to get one at around $500 AUD above the cost of the CPU+NVME SSD alone.

You are better off using an internal DC->DC supply like this approach especially if you are using a Mini-ITX case: https://hdplex.com/hdplex-400w-hi-fi-dc-atx-power-supply-16v-24v-wide-range-voltage-input.html Assuming you could find a place to buy this motherboard you would still have to have...

If your using a Mini-ITX case and not specifically a Thin Mini-ITX case you would be better off trying to use a miniature internal DC-DC power supply like this: https://hdplex.com/hdplex-400w-hi-fi-dc-atx-power-supply-16v-24v-wide-range-voltage-input.html Then you can use a laptop brick to power...

I know from experience getting LVDS to work is a tricky beast. But I have succeeded a few times EVENTUALLY! You need to have the all the components configured correctly I.e. correct connectors, cables, screen/converter board and LVDS BIOS configurations. You have my commiserations

Assuming you could get this board and easily hack the BIOS this might currently be the best option: AMD Ryzen™ 9 PRO 3900 (65W TDP) (12C/24T) (OEM only) Then later once the BIOS support or is hacked then this: AMD Ryzen™ 9 5900 (65W TDP) (12C/24T) (OEM only)...

@infoberg Note: AMD A520 chipset (and therefore this motherboard) is apparently not compatible with AMD Ryzen 5 3400G, Ryzen 5 3400GE, AMD Ryzen 3 3200G, Ryzen 5 3400GE (and their PRO equivalent versions) and all the previous Ryzen 1000/2000 Series processors.

Keep an eye open here for supply opportunities in the EU https://geizhals.de/gigabyte-ga-a520i-dash-a2511112.html and here https://skinflint.co.uk/gigabyte-ga-a520i-dash-a2511112.html?hloc=at&hloc=de&hloc=pl&hloc=uk&hloc=eu

These low 35W TDP CPUs supported are: AMD Ryzen 7 PRO 4750GE 8C/16T 3.1GHz / 4.3GHz 4MB 8MB 2000MHz Renoir 7nm A1 35W F1 AMD Ryzen 5 PRO 4650GE 6C/12T 3.3GHz / 4.2GHz 3MB 8MB 1900MHz Renoir 7nm A1 35W F1 AMD Ryzen 3 PRO 4350GE 4C/8T 3.5GHz / 4.0GHz 2MB 4MB 1700MHz Renoir 7nm A1 35W F1 Probably...

Headsup on a new AM4 A520 Mini-ITX / Thin Mini-ITX crossover motherboard here: https://smallformfactor.net/forum/threads/ga-a520i-dash-is-this-a-crossover-thin-mini-itx-does-anyone-know-where-i-can-buy-one.16695/

Thanks for the heads-up on the problem I have now fixed about 8 of them.. No idea how that happened! Even tho the 2nd Network connector rises above the 25mm opening it will fit within a typical Thin Mini-ITX case lid. I have done this before with some other motherboards. The reason this is not...

I don’t think Ryzen has a DMI link per se (that’s an Intel standard as far as I am aware). There is a similar southbridge bottleneck if that’s what you mean but the x16 slot on this motherboard is not connected through that and is connected directly to the CPU lanes. Maybe I don’t fully...

Although way late (sorry) - I would recommend its use for a Workstation which is what I am doing.

Is this possibly a crossover Thin Mini-ITX ie a Mini-ITX with the possibility to mount it in a Thin Mini-ITX case? Does anyone know where I can buy one? GA-A520I-DASH (Crossover - Not strictly a Thin Mini-ITX motherboard) https://www.gigabyte.com/Motherboard/GA-A520I-DASH-rev-10#kf Unique...

RETRACTION: I really should not have said that the ASRockRack X570D4I-2T motherboard has a suite of overclocking tools. What it does however have is many confusing (including overclocking) BIOS options but literally, no normal gamer style overclocking aids/tools. The motherboard is a pain in the...

@ermac318 I had not spotted that motherboard yet. If I had I too may have chosen that one. https://www.asrockrack.com/general/productdetail.asp?Model=X570D4U-2L2T#Specifications Even that board too if it supports overclocking will depend on case cooling and/or heatsink mods to "handle"...