Recent content by Ricobandito

i will upload some pics of the final build, unfortunately i had to desamble everything again due to mainboard issues (GPU will not recognizes or runs with x8, x4 or x1... seems that the x16 lot of the Mainboard has an defect). ASUS decided to not repair. so now im sitting on that broken Mainboard

Update: Tube routing was not easy. Due to the minimal space, its hard to measure and finding a right position. I used a ton of 45° and 90° fittings to get it, but at the end i found a good solution. Keep in mind by using my bracket design, a 15cm riser is slightly too short. The next length is...

mostly will be hard tubes but i gonna use 2 softubesfrom the cpu block to the 120 Rad and from the Rad to the gpu. Otherwise i would not have access anymore to reach the mainboard vor maintaining or fixing issues

One of the biggist nightmare in such a case is definitive the cable routing, some of the RVZ03 cables are just so stupidly long, that cutting and recrimping is an suitable option. i was to lazy for this and so i used the good old zipties and in some cases sellotape :D. Nevertheless the free...

So here are the created parts as 3d printout as finished product ready to install. PSU bracket GPU Bracket 2.5" holder

New Update: It took me a extreme while until i was able to continue the project, but Reallife goes first. Nevertheless i invested many hours the last days to bring this project to a succesfull stage. Here youe can see a updated 3d printing model for holding the PSU It has inserts to place...

i know it has been a while but here a little update on this project, after purchasing a 3d Printer i started designing a view parts to costumize the build more and printing them. For example i designed a custom bracket for the gpu, that i can rotate it 180° that the gpu shows up instead of...

hello and late but little update to my build, i succesfully made my own bracket from alluminum according to my sketch above. Now i have sligtly more space in height, width and depth for further customisations. I also started making custom sleeved cables to avoid unnecessary cablesalad and for...

The inside cant be flipped over. For first i have to connect the cable as it is. that looks not perfect and i donw like the idear that a cable is bended that way like an "U". But making an own cable, where i dont have any experience is to risky i guess. Yes a simple sheet of metal could solve...

Directy can confirm 2 Style Issues: 1. the inclosed psu cable of the Silverstone doesn't fit well in combinatuon with the corsair SF 600, the cable angle points into the opposite direction as the cable management does for it. A second Cable with a opposite direction would be great, unfortunately...

Wheyo Guys and im really appreciate to share my experience, progress and your feedback and suggestions to my project. Whats the plan? Im gonna build a custom loop into the Silverstone Raven RVZ03B. There are some things where i have or want to make modifications. I try to keep you guys up to...

1080 TI Founders Edition allows only 1slot usage.